Latest news on Processingtalk categorised by product type
Hazardous area interfaces, Enclosures
Archive page 8 of 9
Our RSS feed for Hazardous area interfaces, Enclosures press releases
Optimum landfill and remediation site safety
User application article EPG breakout junction boxes provide a simple way to disconnect power or sensor wires during maintenance or repair work and create a gas-tight seal between riser, well or sump and your control panel
News from EPG Companies Inc (25 May 2004)
IP67 boxes for Ethernet and other connections
Overcoming the need to put Ethernet connections into enclosures, the latest Beckhoff fieldbus boxes are rated to IP67 and can be mounted in the open
News from Hayes Control Systems (24 May 2004)
Stylish enclosures for stack sample analysers
User application article P S Analytical needed an enclosure manufacturer to provide products for numerous applications but at the same time be able to have a corporate style for a range of process analytical hardware Brochure available
News from Rittal (11 May 2004)
Australian and US certification for cable glands
Contractors, manufacturers and design engineers in hazardous area safety will appreciate that Australia and USA are the latest to test and certify the performance of Hawke cable glands
News from Hawke International UK ( 3 May 2004)
Surge protected intrinsically safe isolators
Phoenix Contact has extended its range of two-part IS signal isolators with the introduction of base terminals with integral surge protection Brochure available
News from Phoenix Contact (11 March 2004)
Sensors range meet Atex Zone 20 dust regulations
A new Rechner catalogue is available that contains information relating to all ATEX certified capacitive sensors: Rechner have also produced a poster that explains fully the new ATEX directive
News from Rechner Sensors (10 March 2004)
Compact interface links real-world signals to USB
For equipment designers wishing to be able to link standard I/O signals to a USB port, the new PMD-1208LS Personal Measurement Device from Adept Scientific is the ideal low-cost product Brochure available
News from Adept Scientific ( 2 March 2004)
24 hour technical support to global customers
Hawke International, suppliers of cable glands, connectors, field bus systems and enclosures for hazardous areas and harsh industrial environments, has launched a new round-the-clock help service
News from Hawke International UK (27 February 2004)
New junction box design for process environments
Wiring junction boxes in demanding process environments is now much easier thanks to a radical new design by Hawke International: new box design improves wiring safety and saves time
News from Hawke International UK (14 January 2004)
Compact enclosure meets IP69K
Capable of withstanding 100 bar water at 80C from a distance of 150mm for two minutes, the Rittal IP69K compact enclosures are the ideal solution where high-pressure cleaning is a consideration Brochure available
News from Rittal (16 December 2003)
Intrinsically safe ground clamp has power supply
The new mains powered Bond-Rite Remote EP provides a reliable and economical way to enable static bonding connections to be continuously checked and verified in flammable atmospheres Brochure available
News from Newson Gale ( 4 December 2003)
ATEX approved explosionproof switchboxes in demand
This year's introduction of ATEX certified explosionproof switchboxes has created a much higher level of demand than could have been predicted, says valve accessories specialist Rotork Valvekits
News from Rotork Controls (20 November 2003)
New catalogue for electronics enclosures
The new Rittal Electronic Systems 400 page catalogue containing details of their range of enclosures, racks, subracks and systems specifically for electronics applications is now available Brochure available
News from Rittal (19 November 2003)
TopTherm Cooling Units with NEMA 4/4X Protection
Rittal has launched the next generation of enclosure cooling units manufactured with a protection category of NEMA 4 and 4X, for the food, chemical and petrochemical industries Brochure available
News from Rittal ( 5 November 2003)
Stainless steel accessories for enclosures
Hoffman is pleased to announce the introduction of Type 4X rated 316 stainless steel accessories for new enclosure applications and for upgrading existing Hoffman enclosures.
News from Hoffman (31 October 2003)
The new Hoffman heavy duty open frame rack
Hoffman announces the introduction of its Heavy-Duty Open Frame Rack with open access on all sides for easy equipment access, providing space for positioning and securing LAN and WAN equipment
News from Hoffman (18 September 2003)
New Wall Box from Rittal
The new Rittal Wall Box is the ideal solution for practical accommodation of active and passive networking equipment Brochure available
News from Rittal (16 September 2003)
Compact Panel from Rittal
Ideal for small operating control units built into front panels, the new Rittal Compact Panel is now available in five sizes, all of which are only 87mm deep Brochure available
News from Rittal (16 September 2003)
Small enclosures bring big benefits
With high-quality construction and a host of design benefits, Moeller Electric believes its CI-K miniature enclosure range will have a major impact in the industrial housings market
News from Moeller Electric (10 September 2003)
Rittal Premium Line KL enclosures meet IP69K
Rittal announce four new sizes of KL style enclosures, manufactured in grade 304 stainless steel, which meet the high sealing requirements of IP69K to DIN 40 050-9/5.93, using a compressed seal Brochure available
News from Rittal ( 8 September 2003)
Earlier news from this category...
Latest news from this category...
