Latest news on Processingtalk categorised by product type
Signal conditioners, isolators, modems
Archive page 2 of 2
Our RSS feed for Signal conditioners, isolators, modems press releases
Cable process controllers quickly
Phoenix Contact extends the range of structured cabling solutions to include the Emerson DeltaV and ABB S800 process control systems, allowing wiring to field terminals to be completed in minutes Brochure available
News from Phoenix Contact (16 September 2004)
No need to rewire for Simatic S5 to S7 upgrade!
Phoenix Contact has extended its range of PLC structured cabling products to facilitate the replacement of Simatic S5 systems with Simatic S7 in the automation market Brochure available
News from Phoenix Contact (30 August 2004)
Counting the cost of Thunderstorms
Phoenix Contact has the solution for significantly reducing the damage to electronic equipment and preventing expensive downtime as a result of lightning strikes affecting electrical systems Brochure available
News from Phoenix Contact ( 9 August 2004)
Solenoid valve control digital output modules
These modules provide higher maximum load than any of the other ADAM-4000 I/O modules, and feature a communication watchdog, fail safety functions, as well as support for the Modbus RTU protocol
News from Advantech (UK) (27 July 2004)
New 6.2mm wide Analogue MCR modules on show
Phoenix Contact will be showing its new range of Mini MCR Analogue modules at the Instrumentation Scotland and Offshore Systems Exhibition, Aberdeen, 8-9th September 2004 Brochure available
News from Phoenix Contact (19 July 2004)
Adam-4914V compact surge protector released
With four channels and protection up to 4,000 volts, this compact Adam-4914V surge protector saves space and shields sensitive control system equipment
News from Advantech (UK) ( 8 June 2004)
Moore Industries first anniversary in China
Moore Industries International, a world leader in the supply of signal interface instruments, process control and distributed I/O networks, celebrates the first anniversary of their office in China
News from Moore Industries International ( 1 April 2004)
Combination I/O Module saves time, money and space
The "Double Density" design of the new Sixtrak combination I/O module (model ST-MIX-16880-D) provides sixteen discrete inputs, eight discrete outputs, and eight analogue inputs in a single unit Brochure available
News from Sixnet ( 2 February 2004)
Surface-mount strain gauge amplifier/controllers
Celsum Technologies Limited can now supply the LCA15 range of surface-mounting intelligent strain gauge amplifiers and controllers, specifically designed for weighing applications Brochure available
News from Celsum Technologies ( 9 December 2003)
All-in-one remote power controller from E-T-A
The new E-T-A Circuit Breakers remote power controller combines the capability of an electronic switching relay with self-limiting characteristics, and optimised over-current protection Brochure available
News from E-T-A Circuit Breakers ( 5 December 2003)
New, high density DIN rail I/O from Power-IO
The DIN rail I/O modules from Power-IO are ideal for connecting real world discrete ac or dc signals to a PLC, PC, or other automation equipment, and occupy only 0.30 inches of din rail space
News from Power-IO (26 November 2003)
The solution for battery-backed DC power systems
After customer feedback Omniflex introduce the Powerterm Charger/power supply series, suitable for DIN rail mounting and ideal for RTU's, dataloggers, alarm systems and remote field instrumentation Brochure available
News from Omniflex (21 November 2003)
'Omniterm' solves all your Loop problems
Instrumentation loop problems are frustrating at the best of times and downright time consuming affairs for plant maintenance staff to deal with: most problems relate to isolation and ground faults Brochure available
News from Omniflex (20 November 2003)
Trip amplifiers are smaller and cheaper
Instrumentation specialist Lee-Dickens has added two DIN-rail mounted trip amplifiers to its Beta range of products, at a size and cost that improves on anything else currently available Brochure available
News from Lee-Dickens (28 October 2003)
Isolated converters/transmitters
Up to 4 channels of 4-20mA conversion and isolation capacity are available in a standard DIN rail mount enclosure to take input from RTD sensors, 3-wire slidewire sensors, AC voltage or DC current
News from Amalgamated Instrument Co ( 4 August 2003)
Strain Card connects sensors to PC/PLC directly
The DSC Digital Strain Card is a cost-effective and compact conditioning amplifier which allows a strain gauge device, ie load cell, pressure transducer or torque sensor to be connected to a computer Brochure available
News from Celsum Technologies (29 July 2003)
Strain gauge amplifiers in cylindrical packages
The D-Cell Digital Strain Puck is a cost-effective, highly accurate, compact and robust conditioning amplifier allowing a sensor connection to PC or PLC without an expensive A to D card Brochure available
News from Celsum Technologies (22 July 2003)
HART loop interface module
Moore Industries new HIM smart HART Loop Interface and Monitor module unlocks the full potential of new and in-place "legacy" Smart HART transmitters, with no additional process penetrations or wiring
News from Moore Industries International (24 June 2003)
Sitewatch data concentrator takes 6 serial inputs
Lee-Dickens has launched the Sitewatch Data Concentrator, for collecting serial data inputs from up to 6 separate collection points - for example PLCs - and combining them into a single memory space Brochure available
News from Lee-Dickens (23 May 2003)
Budget-priced 4-channel interface unit
This compact DIN-rail mounted unit has been designed to interface thermocouples, low level sensors and 4-20mA signals to data acquisition and process control systems
News from Audon Electronics (22 May 2003)
Latest news from this category...
