News releases on Processingtalk categorised by date

Sunday 20 April
to Saturday 26 April 2003

The 27th ACHEMA takes place from 19 to 24 May 2003

This ACHEMA will be on record as the second biggest in its 83-year-old history, with almost 4,000 exhibitors from all five continents occupying an exhibition area of around 140,000 square metres

News from ACHEMA 2009 (24 April 2003)

Motor adaptor eases connector installation

A new adaptor designed to ease the installation of industrial connectors onto motor junction boxes has been introduced by Harting.

News from Harting (24 April 2003)

Accurate dispensing of 1.00 cc of gel

A leading contract electronics manufacturer in Glasgow, Scotland required a specialist machine to accurately dispense 1.00 ccs of a mixed 2 part Shin-Etsu X-832-050 Silicone Dielectric Gel

News from Integrated Dispensing Systems (24 April 2003)

New toolbox kit makes Easy even easier

Moeller Electric has made life easier for contractors and engineers by introducing the Easy toolbox starter kit

News from Moeller Electric (24 April 2003)

New UK director for Rockwell services division

Dominic Molloy has been appointed to the position of Global Manufacturing Solutions (GMS) regional director for the UK and Ireland

News from Rockwell Automation (24 April 2003)

Celebrity guest speakers at ME event

Delegates can still register for the Manufacturing Excellence event on Teesside, for either one, two or three days: seven streams of lectures on process industry automation and performance improvement

News from Emerson Process Management - UK/Ireland (24 April 2003)

Split shaft seals for mixers and blenders

MECO seals offer complete containment of dry powders, pastes, slurries, corrosives, fluids, solvents, vapours and gases, where traditional packings fail to seal  Brochure Available 

News from Meco Shaft Seals (23 April 2003)

Automatic samplers for dry bulk materials

An expanded series of Isolok automatic sampling devices offered by Bristol Equipment Company draws measured portions of dry, flowable, bulk materials in powder, flake, granular or pellet forms

News from Sentry Equipment Corp (22 April 2003)

New Division for ConProTec

ConProTec, a leading innovator in 2-component adhesive dispensing systems and home of the Statomix line of static mixers, announces the opening of its Custom Products Division located in Salem, USA

News from Sulzer Mixpac USA (22 April 2003)

Remove unwanted tramp metal with Eriez

Separate, detect and sample for improved protection and quality control: on Pavilion stand p128 at Hillhead 2003 Eriez Magnetics will be exhibiting their full range of metal detectors and separators  Brochure Available 

News from Eriez Magnetics Europe (22 April 2003)

Eurotherm recorders introduce 'Master Comms'

Eurotherm have introduced an advanced new communications feature to its Series 5000 Data Acquisition Products, allowing Eurotherm recorders to link with other instruments via a 'Master Comms' link

News from Eurotherm (22 April 2003)

CCS Tri-Colour Light Source

The revolutionary 'Tri-Colour' LED light source brings high power LEDs, full colour and colour temperature control to fibre optic lighting systems  Brochure Available 

News from Firstsight Vision (22 April 2003)

Green lasers are more visible!

The new green, focusable, TEC lasers from StockerYale/Lasaris offer greater contrast on difficult surfaces and are particularly suited to medical applications  Brochure Available 

News from Firstsight Vision (22 April 2003)

The new I-Gauge 'Vision Appliance' is announced

I-Guage is a dedicated 'Vision Appliance' device, intended for anyone who requires machine vision or inspection, but without the need to opt for a fully specified PC solution, with the associated cost  Brochure Available 

News from Firstsight Vision (22 April 2003)

Cost-effective liquid transfer solutions

A new 24-page brochure from Flux Pumps details their wide range high-efficiency, high-reliability centrifugal immersion pumps designed for efficiency, safety and reliability

News from Flux Pumps International (UK) (22 April 2003)

Flow control of low flow rates

A new brochure from PVL details the Honsberg range of metering and control products for controlling gases or liquids at low flow rates, where special purpose products are needed for accurate control  Brochure Available 

News from PVL (22 April 2003)

QISoft process information software success

QISoft Limited announces the installation of its market leading process information software, QIS v5, at RBV Leaf at their Sneek chewing gum manufacturing facility in The Netherlands.

News from Qisoft (22 April 2003)

Innovation from Sartorius

In keeping with their tradition of innovation and technological leadership, weighing experts Sartorius carried out a total of 183 patent and trademark applications in 2001  Brochure Available 

News from Sartorius UK (22 April 2003)

New scale for the food industry

Sartorius has introduced a new and exciting scale for the food industry, designed specifically for portion control and takeaway applications  Brochure Available 

News from Sartorius UK (22 April 2003)

Sartorius introduces new Combics industrial scales

Sartorius has introduced an amazingly flexible range of industrial scales, designed to meet the needs of the food, pharmaceutical and chemical industries, plus electronics and metal working  Brochure Available 

News from Sartorius UK (22 April 2003)

Flow monitoring system saves Beckton STW GBP20k

 User Application Article  Innovative use of a new differential level monitoring system from Solartron Mobrey has saved Thames Water thousands of pounds on a flow meter refurbishment project at Beckton Sewage Treatment Works

News from Emerson Process Management - Mobrey Measurement (22 April 2003)

Lightweight, portable drum pump packs a punch

The 'best value drum pump on the market' is the claim for the new Finish Thompson Econo EP Series pump, a competitively priced portable pump recently introduced by Michael Smith Engineers

News from Michael Smith Engineers (22 April 2003)

High-performance process sieves to ASTM standards

By employing leading-edge electroforming techniques, believed to be the most advanced in the world, Tecan is producing high-accuracy sieves with super-fine apertures, highly consistent across the mesh

News from Tecan (22 April 2003)

Total number of news releases published during the week: 23

News releases from 2008 2007 2006 2005 2004 2003 2002

 

Send us a blank email now to get our free regular email newsletter from the Editor
Processingtalk news by product category
Processingtalk news by date
Processingtalk news by manufacturer
Processingtalk Home Page


 

Register for the FREE Processingtalk email newsletter now! News and more every issue. Click here for details.