Product category:
Power supplies and plant cabling
News Release from: Aerco | Subject: E-1048-8D
Edited by the Processingtalk Editorial
Team on 23 October 2006
New smart relay from Aerco
An extension to the popular range of remote controlled, load disconnecting relays from E-T-A provides both electronic relay and electronic over-current protection in a single unit
New from Aerco is an extension of the popular range of remote controlled, load disconnecting relays from E-T-A that provides both electronic relay and electronic over-current protection in a single unit The E-1048-8D is smaller than its predecessors in the E-T-A range of smart power protection relays and is designed for application where a status indicator is not required
This article was originally published on Processingtalk on 8 Sep 2005 at 8.00am (UK)
Related stories
Increased performance from new DC fans
Aerco now can supply a new, low cost, DC Jamicon fan in the 50mm x 50mm x 10mm frame size that has a significantly improved performance over the previous fans in this range.
CECC spec connectors from Aerco
Aerco is soon to be stocking connectors approved to European Specification CECC75201-002, with corrosion resistant shells ideal for saline environments and other harsh conditions
Prior to the introduction of these relays it was necessary to install several discrete components, in order to switch and protect loads remotely, whereas now it is possible to achieve this while reducing component count, simplifying circuit design and lessening the likelihood of component failure.
The 4-pin layout is designed for use with standard automotive relay sockets and is available with a choice of current ratings from 1 to 25A and with an operating voltage range from 9 to 35V allowing the connection of 12 and 24VDC loads.
It is possible to connect several units in parallel to switch or monitor loads in excess of 25A.
The integral power electronics of the E-1048-8D provides a wear-resistant switching function that is insensitive to shock and vibration and the extremely low induced current consumption, less than 1mA, is ideal for battery buffered applications.
This new smart relay will be ideal for magnetic valves, motors and lamp loads that have to be switched, protected or monitored and it will find applications in all types of road vehicles and in the rail and marine industries.
• Aerco: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
