Product category:
Boilers, Heat Exchangers, Dryers and Refrigeration
News Release from: Air Control Industries | Subject: Airknife dryer at Corus
Edited by the Processingtalk Editorial
Team on 28 March 2008
Airknife drying system achieves rapid
payback
The new blower-powered Airknife moisture removal system at the Corus Trostre Works, Llanelli saves money and helps to ensure steel strip quality: system payback was achieved in just 21 weeks
With ever increasing competition from around the world, manufacturing companies are reviewing their processes constantly to see if there are ways of reducing costs If the new systems introduced also make a contribution to enhancing the production process then that is a valuable bonus
This article was originally published on Processingtalk on 4 Aug 2008 at 8.00am (UK)
Related stories
AirKnives blow microbrewery label problems away
Most of the ACI bottle and can drying machines are supplied to high throughput, internationally known brewers and bottlers, drying solutions for smaller operations like microbreweries are available
Removal of 'Lights' from waste using air blowers
A novel way of employing blowers for extracting 'lights' from skip loads of waste for more effective - and more financially rewarding - has been applied in two UK recycling plants
On this basis, the new blower-powered Airknife moisture removal system installed on the five-stand mill at the Corus Trostre Works, Llanelli must be considered a genuine success, because it both saves money and helps to ensure quality.
Prior to the installation of the blower-powered Airknives, compressed air delivered through 66 nozzles was used to remove surface moisture (lubricant and coolant) from steel strip as it exited the mill.
This was both an expensive process and one of variable performance due to some inherent characteristics of compressed air that impacted upon quality.
Further reading
Staff approved safe and easy employee de-dusting
Wavin, Europe's leading manufacturer of plastics pipe and ducting, has recently installed a safe and efficient method for personnel de-dusting at its factory in Durham, that is popular with employees
ACI dryer enables new CCE bottle labelling
In the fast moving FMCG market product awareness is king: ROSO (Roll-on Shrink-on) provided the solution, on a new bottle shape, but ACI was needed to ensure the bottle surfaces were dried effectively
Electronically control fans for economic air flow!
The QB EC Series of Slimline fans employ intelligent-motor driven impellers that permit units to be optimised for specific applications with regard to efficiency, speed, acoustic performance and cost
The 66 nozzles delivered a total of 1748scfm at 5Bar.
This equates to more than 7HP/5kW per nozzle making a total in excess of 345kW with an annual running cost for a 48 week/year of approximately GBP75,000.
By comparison, the Airknife system, supplied by air handling specialist Air Control Industries (ACI) of Chard, uses just 60kW yet achieves more efficient moisture removal.
The result, payback was achieved in just 21 weeks.
In addition, whilst the compressed air supply was vulnerable to demands from other operations within the plant, resulting in inconsistent performance which impacted upon quality, the blower-powered Airknives deliver the required air output - constantly.
Air delivered by the Airknives also has the benefit of being heated by the blowers, as a result of air compression, making it a more effective drying agent.
The original compressed air moisture removal system was also vulnerable to contamination by oil and moisture.
This had the potential to cause imperfections in the tinplate.
With the new Airknife system, air is filtered at the inlets of both the enclosure and blower so such problems are eliminated.
The ACI Airknife moisture removal system comprises a pair of stainless steel chevron-shaped airknives covering a width of 1240mm fed at all times by four 15kW EP10 blowers, which are housed in pairs in acoustic enclosures.
There are in fact six blowers available, but two are on standby.
Air from the blowers is delivered to the Airknives, first via 200mm ducting and then by two 150mm ducts.
The blowers are powered by inverter-controlled, high-efficiency EFF1 motors.
This permits the blowers to be ramped up and down as required whereas the compressed air system was either on/off and could be inadvertently left on between production runs.
"Low-volume and applications which require low to medium-pressure are an inefficient use of compressed air", said Paul Millett, Senior Development Engineer, "whereas air delivered in high-volume at low pressure, as supplied by the ACI blower-powered Airknives, is ideal.
In less than six months we have recouped our investment and quality has also improved through the reduction of imperfections caused by contamination during the moisture removal process".
The metal strip passing through the tinplating mill varies in width from 610mm to 1236mm and travels at speed up to 1524m/min. Request a free brochure from Air Control Industries ...
• Air Control Industries: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
