Categories
- Plant Instrumentation (5,478)
- Process Control and Management (2,525)
- Communications and HMI (2,535)
- Process Plant and Equipment (6,164)
- Processing Industry Events and Services (3,198)
- News from specific industry sectors (2,263)
- ENVIRO-Talk - Environment + Pollution (550)
- FLOWtalk - Flow Measurement (753)
- WATER-Talk - Water Industry News (1,211)
Allegro MicroSystems Europe
Les Pleiades
Park Nord Annecy
Metz-Tessy
74370
France
Latest articles from this company
News releases from this company
Current sensors with 2100 V RMS isolation
Allegro MicroSystems Europe has introduced two new families of high-performance low-noise Hall-effect current sensors, measuring 5A, 20A or 30A FS and featuring an isolation voltage of 2100 V RMS
News from Processingtalk, 2 February 2007
Automotive-grade Mosfet ICs for motor control
A range of automotive-grade Mosfet pre-driver ICs for in-vehicle motor control applications is now available from Allegro MicroSystems Europe
News from Processingtalk, 10 August 2006
Programmable linear Hall-effect sensor ICs
A new range of high-precision programmable linear Hall effect sensor ICs which are ideally suited to replacing contact potentiometers in automotive and industrial linear position-sensing applications
News from Processingtalk, 29 May 2006
IC integrates Hall element and motor control
The new A1441 from Allegro MicroSystems Europe is a full-bridge motor driver integrated circuit designed to drive single-phase, low-voltage bipolar brushless DC motors
News from Processingtalk, 21 February 2006
Chopper-stabilised Hall-effect latch for motors
The A1242 from Allegro MicroSystems Europe is a new chopper-stabilised latch Hall-effect sensor IC which is ideally suited to use in motor-speed and direction-sensing applications
News from Processingtalk, 7 February 2006
Motor driver IC with built-in translator circuitry
The new A3979 from Allegro MicroSystems Europe is a complete microstepping motor driver IC with built-in translator circuitry
News from Processingtalk, 14 October 2005
Analogue self-calibrating speed sensor
The new ATS616LSG from Allegro MicroSystems Europe is an analogue self-calibrating speed sensor designed for non-TPOS (true power on state) automotive camshaft applications
News from Processingtalk, 2 September 2005
DMOS microstepping motor driver ICs
Allegro MicroSystems Europe introduce two new DMOS microstepping motor driver integrated circuits that are easy to interface, with built-in translator circuitry
News from Processingtalk, 8 August 2005
Chopper stabilised Hall-effect switch and latches
Allegro MicroSystems Europe is expanding its family of successful chopper-stabilised Hall-effect switches and latches with four new product offerings
News from Processingtalk, 25 July 2005
Hall-effect switches are higher-performance
The new A120x family of ultra-sensitive bipolar Hall-effect switches from Allegro MicroSystems Europe are next-generation drop-in replacements for the popular Allegro A313x family
News from Processingtalk, 8 July 2005
Automotive camshaft speed and gear-tooth sensor
New gear-tooth sensors are designed to operate with true power-on state recognition, and self-calibrate in running mode to improve accuracy performance over a wide temperature and air-gap range
News from Processingtalk, 27 May 2005
World's first omnipolar Hall-effect sensor
The A3245 is the world's first omnipolar Hall-effect device for 3.6 to 24 V operation, making it ideally suited to use in automotive and industrial applications traditionally handled by reed switches
News from Processingtalk, 16 May 2005
Digital Hall-effect switches are ultra-sensitive
The A3213 and A3214 from Allegro MicroSystems Europe are micropower omnipolar digital switches based on ultra-sensitive, pole-independent Hall-effect switches with latched digital outputs
News from Processingtalk, 28 April 2005
Low-cost field-programmable Hall-effect sensors
A new family of low-cost linear Hall-effect sensor ICs, the A1373 and A1374, are ideal for position or torque sensing, and offer field programmability on the output pin
News from Processingtalk, 23 March 2005
New Hall-effect sensors from Allegro MicroSystems
At Sensor and Test 2005, Allegro MicroSystems Europe will be showing a number of major new developments in Hall-effect sensor technology for automotive and industrial applications
News from Processingtalk, 21 March 2005
Allegro has European Sensor Applications Centre
Allegro has opened a Sensor Applications Centre in Annecy, France, to provide technical support for the company's European customers for Hall-effect sensors in the automotive and industrial sectors.
News from Processingtalk, 13 January 2005
High-accuracy addition to current-sensor family
The ACS754/5 Series from Allegro Microsystems Europe is a new, high-accuracy addition to the family of Hall-effect current sensors, providing a smaller, lower-cost alternative to toroid-based sensors
News from Processingtalk, 26 November 2004
High-accuracy analogue Hall-effect speed sensor IC
The A1425 is a high-accuracy analogue Hall-effect speed sensor IC with an integrated tracking capacitor and a dual zero-crossing output signal, making it ideal for automotive crankshaft speed sensing
News from Processingtalk, 8 September 2004
Leading-edge automotive sensor and motor drive ICs
At the Automotive Electronics Congress in Paris, Allegro is featuring a number of leading-edge developments in transmission sensing, cam and crank sensing, current sensing and motor-driver ICs
News from Processingtalk, 3 August 2004
Gear-tooth sensor for rotation speed measurement
The new ATS643LSH from Allegro MicroSystems is a Hall-effect gear-tooth sensor module that is ideal for obtaining speed and duty-cycle information in applications such as transmission speed sensing
News from Processingtalk, 22 June 2004
Not what you're looking for? Search the site.
Featured articles
-
Rittal supplies busbar system
Wellman Automation required a busbar system that was readily available, fully flexible and offered a wide range of current ratings and accessories.
-
Larox pump improves ferrocement
A Larox LPP-T40 pump was chosen for dosing duties by a Dutch ferrocement processor.
