Product category:
Position, speed and torque measurement
News Release from: Allegro MicroSystems Europe | Subject: A3241, A3242, A3230 and A3282.
Edited by the Processingtalk Editorial
Team on 25 July 2005
Chopper stabilised Hall-effect switch
and latches
Allegro MicroSystems Europe is expanding its family of successful chopper-stabilised Hall-effect switches and latches with four new product offerings
Allegro MicroSystems Europe is expanding its family of successful Hall-effect switches and latches with four new product offerings that feature chopper stabilisation: the A3241, A3242, A3230 and A3282 These new products mean that Allegro can now offer a complete family of Hall-effect switches and latches in a variety of sensitivity ranges for position, speed and rotational sensing applications in automotive, consumer electronics and industrial applications
This article was originally published on Processingtalk on 2 Feb 2004 at 8.00am (UK)
Related stories
Two-phase unipolar stepper-motor ICs
Allegro MicroSystems Europe has introduced two new families of translator/driver integrated circuits, which provide the complete control and drive functions for two-phase unipolar stepper motors
DMOS full-bridge motor driver IC
New from Allegro MicroSystems Europe, the A3949 is a DMOS full-bridge motor driver integrated circuit designed for the PWM (pulse-width-modulated) control of DC motors
Each device includes, on a single silicon chip, a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short-circuit protected open-collector output.
The chopper-stabilisation feature of the new devices provides accurate and stable switch points over temperature and minimises the effects of physical stress.
The patented Allegro dynamic offset cancellation reduces the residual offset voltage normally caused by device overmoulding, temperature dependencies, and thermal stress.
Further reading
Current sensor with more bandwidth and accuracy
Allegro has introduced a new product in its ACS75x family of Hall effect current sensors that offers four times the bandwidth and almost double the accuracy of earlier versions
Gear-tooth sensor for rotation speed measurement
The new ATS643LSH from Allegro MicroSystems is a Hall-effect gear-tooth sensor module that is ideal for obtaining speed and duty-cycle information in applications such as transmission speed sensing
Each of the devices offers a particular set of operating characteristics.
The output of the A3241 and A3242 switches is 'on' in the presence of a sufficiently strong south-pole magnetic field facing the marked side of the package.
It will remain 'on' until the presence of a weaker south-pole magnetic field, and remain 'off' with zero and north-pole magnetic fields.
The output of the A3282 latch will be 'on' in the presence of a sufficiently strong south-pole magnetic field facing the marked side of the package, and will remain 'on' until the presence of a sufficiently strong north-pole magnetic field.
The A3230 bipolar Hall-effect switch generally switches 'on' with a south pole of sufficient strength, and switches 'off' with a north pole of sufficient strength.
The output state, however, is not defined if the magnetic field is removed, so an opposing magnetic field of sufficient strength is needed to ensure that the device switches.
Advanced BiCMOS wafer fabrication processing is used to optimise the devices for low-voltage operation, component matching, very low input-offset errors, and small component geometries.
These new switches and latches feature robust ESD capability, reverse battery protection and output short-circuit protection, and will operate from an unregulated supply.
Two package styles provide magnetically optimised configurations for most applications.
Suffix 'LH' is a miniature low-profile surface-mount package, while suffix 'UA' is a three-lead ultra-miniature single-inline package for through-hole mounting.
All four devices are rated for operation over the temperature range from -40C to +150C.
• Allegro MicroSystems Europe: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
