Product category:
Liquid Analysis: Titration, HPLC, IC
News Release from: Applikon Analytical | Subject: Applikon Alert
Edited by the Processingtalk Editorial
Team on 31 May 2006
New distributorship for Applikon
Products
From the 1st June 2006 Metrohm UK will assume the exclusive representation of the Applikon Analytical range of process and environmental equipment for on-line analysis
From the 1st June 2006 Metrohm UK will assume the exclusive representation of the Applikon Analytical range of process and environmental equipment Metrohm UK has exclusively represented the Metrohm AG range of products for nearly fifteen years in the UK and with the ever increasing commonality between hardware, software and methodology used in both Metrohm and Applikon Analytical instruments this business transfer is a logical step in the development of the Applikon Analytical brand to truly "bridge the gap between the process and the laboratory"
This article was originally published on Processingtalk on 20 Sep 2007 at 8.00am (UK)
Related stories
Applikon Alert on-line chloride analyser
The latest addition to the Alert range from Applikon Analytical is their new chloride analyser, for on-line chloride analysis in drinking, process and waste water
On-line gas scrubber analysis
Gas scrubbing to remove particulates and noxious gases is one of the most common process units - on-line analysis is possible to bring the laboratory out to control the plant!
Process chemist needed for southern UK sales
As with all expanding companies, the Metrohm Applikon Division is seeking an additional member for their sales team in the south of England
One of the new Applikon on-line analysers is the "Alert" range for the monitoring of all types of water, whether drinking water, surface water, industrial waste, municipal waste, cooling water boiler feed, power utility or high purity water.
There are principally two types of Alert systems: the "Alert Ion Analyser" for measurements in ppm and % levels and the "Alert Colorimeter" for analysis in the ppb and ppm ranges.
The Alert Ion Analyser uses the unique Dynamic Standard Addition method for analysis which has been developed by Applikon to improve the accuracy and reliability of the ion specific electrodes (ISE).
The Alert Colorimeter readings are made by "Differential Absorbance Colorimetry" which automatically compensates for fouling of the cell and sample colour over a wide measuring range.
Alert on-line Analysers come complete, pre-configured and programmed for their specific applications.
They are also easy to maintain and reagent usage is low, with typically less than 2.5 litres per month doing 1000 analysis per day.
Powerful conditional actions can be performed in the case of unusual analytical results; no value, out of limit or range or unstable values can be used to prompt diagnostic, cleaning, calibration or change of analysis frequency.
Optional reagent level, sample present or leak detectors and other I/O signals for the sample preconditioning are available to further automate the system.
Typical on-line analysis for the Alert ion analyser is: ammonia, calcium, chloride, fluoride, nitrate, potassium and sodium and for the Alert Colorimeter: aluminium, ammonia, chlorine, chromium, ClO2, copper, cyanide, hydrazine, iron, manganese, nickel, nitrate, nitrite, phenol, phosphate, silica and zinc. Request a free brochure from Applikon Analytical ...
• Applikon Analytical: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
