Product category:
Liquid Analysis: Titration, HPLC, IC
News Release from: Applikon Analytical | Subject: Applikon 2011 Titrolyzer
Edited by the Processingtalk Editorial
Team on 18 July 2006
On-line acid concentration measurement
Throughout virtually all industries, ranging from food to steel, from microprocessors to chemicals, the concentration of acid during the various stages of the production process is of vital importance
Throughout virtually all industries, ranging from food to steel, from microprocessors to chemicals as well as car making, the concentration of acid during the various stages of the production process is of vital importance The acids used in all these industries may very well differ in character and concentration, like a few percent of acetic acid (vinegar) in mayonnaise or a high concentration of hydrofluoric acid in an etching operation
This article was originally published on Processingtalk on 29 Nov 2007 at 8.00am (UK)
Related stories
On-line gas scrubber analysis
Gas scrubbing to remove particulates and noxious gases is one of the most common process units - on-line analysis is possible to bring the laboratory out to control the plant!
Process chemist needed for southern UK sales
As with all expanding companies, the Metrohm Applikon Division is seeking an additional member for their sales team in the south of England
They do have one thing in common though, that is in all cases the concentration of the free hydrogen ion, and the total concentration of free and bonded hydrogen play a decisive role in the process to produce a product with an acceptable quality.
It is very appealing to think that from measuring the pH value one could derive the acid concentration.
For several reasons however this is not the case.
The mV value generated by free hydrogen ions at the glass electrode (later in the measurement device electronically converted to a pH reading) is often suppressed by other ions.
Or the acid is not fully dissociated so the pH value only is expressing part of the acid.
Even in those rare cases when all conditions are right, still the accuracy achieved will be poor.
This is explained by the fact that the glass electrode works according to Nernst's law, meaning the logarithm of the concentration creates a linear (mV) signal.
In reverse, obtaining concentration from the pH value, the signal has to be "de-logged", generating a big error.
The only method available to get the accuracy right is titration.
Because here the mV or pH value at the electrode is only a means to detect the equivalence potential, and from that the mL value of the consumed titrant coming from a burette (or precision pump).
Due to the steep shift in mV (pH) around the equivalence point the accuracy of this value is less significant.
With the availability of refined titration methods, done by the microprocessor, titrant volumes can be determined with an inaccuracy smaller than 0.05%.
Recommended Analysers.
For a single stream and single chemistry applications: Applikon 2011 Titrolyzer.
For multiple streams and multiple chemistries: Applikon ADI 2040 Process Analyzer. Request a free brochure from Applikon Analytical ...
• Applikon Analytical: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
