New pressure sensors with accuracy up to 0.05%

The new Pi600 series of pressure sensors from Applied Measurements are available with an accuracy choice of 0.25%, 0.1% and 0.05%, giving a model to suit most industrial and research applications

The new Pi600 series of pressure sensors from Applied Measurements is available with an accuracy choice of 0.25%, 0.1% and 0.05%, giving a model to suit most industrial and research applications with differing budgets across the fields of hydraulics, pneumatics, agriculture, marine, sewage, water, gas chemical and food processing.

They are available in a wide selection of measuring ranges in gauge or absolute versions starting at 250mBar and rising up to 700Bar, with a safe overpressure of 150%.

To suit differing applications and types of interface instrumentation, the Pi600s can be supplied with signal output options of mV/V, 4-20mA, 0.5vdc or 10vdc.

Built to withstand the rigours of harsh operating conditions, they are constructed in a stainless steel housing with a ceramic diaphragm.

Sealed to IP65 with the DIN 43650 plug and socket, or IP68 with the screened multi-core cable.

The compact sensors, measuring just 26.5 diameter and 70mm in length, feature a 1/4" BSP male pressure port connection.

To create a complete pressure measurement or control system, Applied Measurements also offer a comprehensive range of analogue amplifiers and digital displays to suit a variety of engineering applications.

Back to top