Product category:
Motors and Variable speed drives
News Release from: ABB Automation Tech (Drives and Motors) | Subject: variable speed drive via IDS
Edited by the Processingtalk Editorial
Team on 25 November 2005
ABB drive saves Northern Foods GBP2500 a
year
Northern Foods is saving nearly GBP2,500 annually on its compressed air system since installing an ABB variable speed drive at its Riverside Bakery in Nottingham
Northern Foods is saving nearly GBP2,500 annually on its compressed air system since installing an ABB variable speed drive at its Riverside Bakery in Nottingham The 45 kW drive was supplied by Inverter Drives Systems (IDS), an ABB Drives Alliance member
This article was originally published on Processingtalk on 6 Aug 2003 at 8.00am (UK)
Related stories
Record breaking electric car to go the distance
ABB has found a novel way to put its drives and motors to the ultimate test by providing the main drive system for the British challenger to to the world electric land speed record
Data for over 500 motors now available online
Motor performance curves, data sheets and drawings for low voltage AC motors, from 0.055 to 710 kW, are now available from the ABB website: data for more than 500 motors to be downloaded or viewed
Compressed air is used in many of the bakery processes.
As part of their continuing efforts to cut energy costs, Northern Foods decided to investigate its compressed air system and asked Inverter Drive Systems to undertake an energy appraisal and make recommendations.
James Whieldon, maintenance analyst for Northern Foods, says: "Our monitoring and targeting software gives us profiles of the compressors and indicated that there were definite opportunities to improve the amount of energy they were using.
Further reading
High voltage motors are standardised for OEMs
A new range of standard high voltage induction motors, ready for delivery within days, has been launched by ABB: lower priced than engineered motors, these are ideal for OEMs needing standard product
ABB becomes preferred supplier for Imerys Minerals
Aiming to save downtime costs of up to GBP10,000 per hour, Imerys Minerals in Cornwall has entered an agreement with ABB to supply motors and drives to its UK plants
We had used Inverter Drive Systems before and know them well so we were happy to use them again".
IDS confirmed the energy use figures recorded by Northern Foods and recommended the use of a 45 kW ABB standard drive.
There are three compressors in total, two 30kW fixed-speed assist compressors and a 45 kW duty compressor.
The drive was fitted on this compressor, which is in operation all the time.
One of the fixed speed 30kW compressors is used to top up the pressure when demand increases, while the other is on standby in case one of the others goes down.
Zac Dorn of IDS says: "There are always two out of three compressors running so we had to ensure that the fixed-speed assist compressor only came online when the duty compressor with variable speed drive could provide no more air, that is, when it is running at full-speed".
This was achieved by the installation of a pressure sensor to provide accurate system pressure feedback for the drives built-in PID controller.
The contract also involved installation, modification of the existing control circuit to accommodate the drive, commissioning and post-installation energy monitoring.
Says Whieldon: "The drive is now operational and we calculate the actual payback time of the project is 1.5 years, achieving an annual saving of GBP2,450.
But with energy prices rising, the monetary savings will increase".
Pleased with the project, Whieldon adds: "We knew that IDS could complete the job quickly and they are the company we prefer.
They perform accurate energy monitoring and investigate the installation thoroughly.
They are timely, give you the information you require and deliver good savings.".
• ABB Automation Tech (Drives and Motors): contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
