Product category:
Motors and Variable speed drives
News Release from: ABB Automation Tech (Drives and Motors) | Subject: ATEX on LV motors
Edited by the Processingtalk Editorial
Team on 20 April 2006
Many users not ready for ATEX, says ABB
Many motor users are inadequately prepared for the new ATEX regulations, due to be introduced this summer, according to Brian Austick, product specialist for LV motors, at ABB
Many motor users are inadequately prepared for the new ATEX regulations, due to be introduced this summer, according to Brian Austick, product specialist, LV motors, at ABB "In particular, we find that users that have hazardous atmospheres with combustible dust are usually behind in their preparations," Austick says
This article was originally published on Processingtalk on 6 Aug 2003 at 8.00am (UK)
Related stories
Record breaking electric car to go the distance
ABB has found a novel way to put its drives and motors to the ultimate test by providing the main drive system for the British challenger to to the world electric land speed record
Data for over 500 motors now available online
Motor performance curves, data sheets and drawings for low voltage AC motors, from 0.055 to 710 kW, are now available from the ABB website: data for more than 500 motors to be downloaded or viewed
"This includes industries with wood dust, as well as those handling flour and grain, for instance bakeries and breweries".
ABB is now launching a "panic line" ahead of the summer's ATEX implementation.
The service is primarily aimed at ABB customers, but will also be available to other motor users.
Further reading
High voltage motors are standardised for OEMs
A new range of standard high voltage induction motors, ready for delivery within days, has been launched by ABB: lower priced than engineered motors, these are ideal for OEMs needing standard product
ABB becomes preferred supplier for Imerys Minerals
Aiming to save downtime costs of up to GBP10,000 per hour, Imerys Minerals in Cornwall has entered an agreement with ABB to supply motors and drives to its UK plants
It is based around a dedicated mobile number, 078 0292 3649, available 24 hrs, which will be answered by one of ABB's experts on ATEX.
Users can get advice about the steps they need to take to achieve ATEX compliance.
"The reason for the lower level of awareness in industries dealing with combustible dust is that these were never included under the previous, old regulations.
By contrast, the oil and gas industries, which have worked with hazardous areas for years, are well advanced in their preparations," Austick says.
By 1st July users have to install ATEX approved equipment in all hazardous areas, or alternatively carry out a risk assessment on the old equipment.
ATEX is being implemented to protect employees, the public and the environment from accidents owing to explosive atmospheres.
ATEX 137 covers the responsibilities of end users to prevent accidents due to hazardous atmosphere occurring on their premises.
ATEX 95 was implemented in 2003 and covers the responsibilities of manufacturers to supply equipment offering varying degrees of protection to suit a particular level of hazard.
With ATEX 137 being finally implemented this summer, the end user will be fully responsible for the safety of equipment in hazardous areas on the site.
Some of the responsibility can be delegated to the equipment manufacturers, if these have the relevant documentation.
The safety manager of the plant is personally responsible for site safety and the penalties for negligence can be severe.
Essentially, the employer is required to take all reasonable measures to prevent the formation of an explosive atmosphere in the workplace.
Where this is not possible, measures must be taken to avoid the ignition of any potentially explosive atmosphere.
In addition, the effects of any explosion must be minimised in such a way that workers are not put at risk.
• ABB Automation Tech (Drives and Motors): contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
