Product category:
Motors and Variable speed drives
News Release from: ABB Automation Tech (Drives and Motors) | Subject: Paper savings at Cropper
Edited by the Processingtalk Editorial
Team on 21 June 2007
Paper manufacturer saves GBP20kpa with
ABB drives
Variable speed drives from ABB are helping speciality paper manufacturer James Cropper save around GBP20k a year in energy costs at its mill near Kendal in Cumbria
The energy-saving project has achieved a payback of a year and reduced the number of pumps needed to meet the required duty from two to just one As well as providing variable speed to match the changing demand, the drives have enabled improved flow through the pipelines and reduced standby pressure
This article was originally published on Processingtalk on 6 Aug 2003 at 8.00am (UK)
Related stories
Record breaking electric car to go the distance
ABB has found a novel way to put its drives and motors to the ultimate test by providing the main drive system for the British challenger to to the world electric land speed record
Data for over 500 motors now available online
Motor performance curves, data sheets and drawings for low voltage AC motors, from 0.055 to 710 kW, are now available from the ABB website: data for more than 500 motors to be downloaded or viewed
Before the new control scheme was installed, two 55kW pumps supplied medium-pressure water to various processes throughout the mill.
The rate of delivery from each pump was controlled by a valve positioned downstream.
This arrangement meant that the pumps were constantly running at full speed, whatever the demand for water.
Furthermore, the valves placed a significant restriction on the flow of water through the pipes, even when fully open.
James Cropper staff recognised that variable speed drives could provide a more efficient alternative and called in the ABB Drives Alliance partner, Slater Drive Systems, to supply and commission a new drive system.
The new variable speed drives have boosted efficiency at the Kendal mill in three ways.
First, they automatically vary the speed of the pump motors to match the changing demand for water.
Second, they have enabled the removal of the old control valves from the pipework, eliminating the previous flow restriction produced.
"We can now pump more water and serve the maximum demand using only one pump" says Cropper.
The spare pump, complete with its own variable speed drive, is now kept on standby to provide emergency back-up.
Finally, with the new control system James Cropper has been able to reduce the standby pressure in the water system when there is no demand from the mill.
"Now it's easier to control the pump outlet on demand so we can reduce the standby pressure," says Cropper: "The new control system is providing us with the same service as before but it now uses far less energy".
James Cropper has been manufacturing on the same site for around 150 years.
The mill makes a wide range of speciality papers and technical fibres for use in products such as insulation and fire retardant materials.
• ABB Automation Tech (Drives and Motors): contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
