Product category:
Energy management; Boiler control
News Release from: ABB Automation Tech (Drives and Motors) | Subject: 24 off ABB drives at Corus
Edited by the Processingtalk Editorial
Team on 17 October 2007
New drives on old pumps save GBP1
million at Corus
A million pounds in annual energy savings is expected from an installation of ABB drives on cooling water pumps at Corus Strip Products in Port Talbot, South Wales
As part of a plant-wide energy saving programme, 24 ABB industrial drives, ranging from 140 to 400 kW, are being installed to control pumps on the hot strip and cold mills, plus three fans on the coke ovens The pumps recirculate cooling water in the mills, while the fans are used for dust extraction at the coke ovens
This article was originally published on Processingtalk on 6 Aug 2003 at 8.00am (UK)
Related stories
Record breaking electric car to go the distance
ABB has found a novel way to put its drives and motors to the ultimate test by providing the main drive system for the British challenger to to the world electric land speed record
Data for over 500 motors now available online
Motor performance curves, data sheets and drawings for low voltage AC motors, from 0.055 to 710 kW, are now available from the ABB website: data for more than 500 motors to be downloaded or viewed
The cost of the new drives themselves was about GBP1 million; the whole project including pumps, cabling etc is around GBP2.5 million.
The project started in July 2006, when Guy Simms, leader of the energy optimisation team at the Port Talbot site, started looking into the possible energy savings.
The order for the drives was placed in December and installation commenced during the second quarter of this year.
Further reading
High voltage motors are standardised for OEMs
A new range of standard high voltage induction motors, ready for delivery within days, has been launched by ABB: lower priced than engineered motors, these are ideal for OEMs needing standard product
ABB becomes preferred supplier for Imerys Minerals
Aiming to save downtime costs of up to GBP10,000 per hour, Imerys Minerals in Cornwall has entered an agreement with ABB to supply motors and drives to its UK plants
"The pump and fan motors were clearly oversized and running longer hours than necessary," he says: "Much of the equipment on the site was installed during the sixties, seventies and early eighties.
At the time, it was common practice to oversize the equipment by as much as 50%, to make sure it was sufficiently robust.
In many ways this was a successful policy - after all, it has lasted all these years.
But with the ABB drives we are now installing, we can fine-tune the applications to a degree that just wasn't possible in those days".
The applications have varying demand but until now, the pumps and fans have been running continuously at full speed.
Running to demand will not only reduce energy costs but also save water and improve control, particularly of the cold mill, which could potentially result in better product quality.
Low voltage drives are used as they have a smaller footprint compared to medium voltage drives.
A transformer reduces the voltage from the 3.3 kV network on the site to the 690 V used by the drives.
ABB was the preferred choice by the engineers, as there is already a large amount of ABB equipment on the site.
The engineers were happy with the performance of the existing equipment and standardising on equipment from one manufacturer reduces training needs and makes maintenance easier.
The Corus site at Port Talbot in Wales is one of the biggest steelmaking plants in the UK with an annual output of 5 million tonnes.
Energy is the second highest cost for Corus, after raw materials.
The costs and revenues of the business are fairly fixed, so high productivity is crucial to stay competitive.
"Using drives to improve energy performance is not just a matter of payback, it is also a modification with low risk," Simms says: "We can't afford production stoppages.
If a drive solution doesn't work out, the worst that can happen is that we have to turn up the speed to 100% again.
An alternative approach could be to install a new and smaller pump, but then we would also need new pipes and a new bedplate.
Once built, we would be stuck with this solution.
"We prefer to just add drives to existing applications that have proven their reliability over the years.".
• ABB Automation Tech (Drives and Motors): contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
