Product category:
Motors and Variable speed drives
News Release from: ABB Automation Tech (Drives and Motors) | Subject: IEC standard on motor efficiency
Edited by the Processingtalk Editorial
Team on 28 March 2008
Motor efficiency standard will help
energy saving
ABB welcomes a new IEC international testing standard for electric low voltage motors that will make it easier for users to save energy by selecting the right high efficiency motors
The company has already started re-testing its motor range according to the new standard, IEC/EN 60034-2-1, and will publish the new efficiency values in its catalogues during 2008, as soon as tests are completed "We welcome the fact that the efficiency measurement standards for electric motors are becoming more harmonised worldwide" says Steve Ruddell, for ABB Drives and Motors: "We have waited a long time for a level playing field to be introduced"
This article was originally published on Processingtalk on 6 Aug 2003 at 8.00am (UK)
Related stories
Record breaking electric car to go the distance
ABB has found a novel way to put its drives and motors to the ultimate test by providing the main drive system for the British challenger to to the world electric land speed record
Data for over 500 motors now available online
Motor performance curves, data sheets and drawings for low voltage AC motors, from 0.055 to 710 kW, are now available from the ABB website: data for more than 500 motors to be downloaded or viewed
The new standard will tighten up testing procedures and gives manufacturers the opportunity to publish more accurate efficiency values.
Unlike the old standard, which was partly based on estimated values, the new one is based on actual measured values of losses in the motor, giving more accurate efficiency values.
The measuring of winding, rotor and additional load losses are all affected by the new standard.
Further reading
High voltage motors are standardised for OEMs
A new range of standard high voltage induction motors, ready for delivery within days, has been launched by ABB: lower priced than engineered motors, these are ideal for OEMs needing standard product
ABB becomes preferred supplier for Imerys Minerals
Aiming to save downtime costs of up to GBP10,000 per hour, Imerys Minerals in Cornwall has entered an agreement with ABB to supply motors and drives to its UK plants
Winding and rotor losses will now be based on actual measured temperature rises.
The new standard significantly tightens up the calculations of the additional load losses.
These losses are the result of magnetic flux created as the motor is running.
Under the old efficiency testing standard, additional load losses were estimated at 0.5% of the input power at rated load.
The new standard allows for measurement of these losses.
ABB will be using this method, the most onerous, which requires highly accurate measuring equipment.
Motor manufacturers must, under the new standard, state in their motor documentation how the efficiency values have been measured.
The method used under the old standard with estimated additional losses resulted in total losses being estimated too low.
The new efficiency value calculated using measured losses will, therefore, be a slightly lower figure.
The new efficiency figure does not mean that the motor design or performance has changed, only that the efficiency is now measured much more accurately.
Compared to other machines, electric motors are very efficient, typically 95% for a 90 kW high efficiency motor.
But the large number of motors installed means that even small changes in efficiency can make a big difference to industry as a whole.
Two-thirds of the electricity used in industry is used by electric motors.
While high efficiency motors (EFF1) normally cost 10-15% more than standard motors (EFF2), this price premium is quickly repaid by energy savings.
The purchase cost of a motor is only about 1% of its total life cycle cost, electricity being by far the greatest part of the cost.
• ABB Automation Tech (Drives and Motors): contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
