Product category:
Gas monitoring and analysis
News Release from: Barber InSys | Subject: TS800 SDI
Edited by the Processingtalk Editorial
Team on 07 June 2007
Trace Hydrogen gas measurement
The TS800 SDI sensor enables non-destructive location of the highest concentration of Hydrogen in the measurement area, for example, locating cracks and leaks in pressure vessels, pipes and tanks etc
The size of the test object is irrelevant here, since the sensor system has a high resolution and large measurement range, from 0-1000ppm H2 Rising and falling hydrogen concentrations are indicated during the measurement by an acoustic indicator in the sensor handle and also by the numerical display of the measurement on the T2000 indicator
This article was originally published on Processingtalk on 11 May 2004 at 8.00am (UK)
Related stories
New ISG K6900 thermal imaging camera system
The new ISG K6900 has it all: it combines all of the latest technologies to create the first predictive maintenance thermal imaging camera that fits in the palm of your hand
The benefit of this is that the user can orientate himself with regard to the highest H2 concentration, either to the interval of the acoustic signal or to the displayed measurement values and thus systematically isolate the leak.
In addition to 6-step sensitivity adjustment, the control unit included in the supply package features a special function for differential indication measurement by means of 2 real-time measurement values based on different positional co-ordinates.
The high performance rechargeable battery pack enables continuous mobile use of the sensor system for approx 4 hours.
• Barber InSys: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
