Product category:
Pressure/temperature regulators, steam traps
News Release from: Beko Technologies | Subject: Bekomat 31/32
Edited by the Processingtalk Editorial
Team on 19 January 2007
New design principle for condensate
drains
The new design principle used in the Bekomat 31/32 condensate drains just launched by Beko Technologies uses only two parts, offering considerable advantages in terms of maintenance and economics
The new design principle used in the Bekomat 31/32 condensate drains just launched by Beko Technologies uses only two parts, offering considerable advantages in terms of maintenance and economics The two parts are: a service unit comprising the corrosion-resistant aluminium housing together with all maintenance-relevant components, and an electronic control and sensor unit which is installed only once
This article was originally published on Processingtalk on 7 Sep 2007 at 8.00am (UK)
Related stories
Maintenance with one swift movement
The new Bekomat 31/32 condensate drains made by Beko Technologies now consist of only two element groups, so that complete maintenance can be carried out with one single movement
Measurement is key to eliminating air waste
A new measuring instrument allows comprehensive analysis of the four areas that are decisive for optimising the economic performance of a compressed air system
Caring for your Bekomat condensate drain
It is widely accepted that the Bekomat condensate drain from Beko Technologies is the world's most reliable condensate drain: so why do you need 'Beko Service Direct' to look after it?
Both parts are coupled via a practical snap connection.
This design makes it possible to replace all parts subject to wear or requiring maintenance in one go: the old service unit is simply and quickly removed and a new, works-tested unit is fitted instead.
The separation and connection of the two modules requires no tools - it's all done in next to no time.
The new service unit, which is pressure and performance tested at the manufacturer's facility, is ready for use.
It does not need any additional electrical installation, and there are no seals or other parts to be mounted.
With this plug-and-play principle, the maintenance of the Bekomat 31/32 devices achieves an optimum of cost effectiveness at minimum time expenditure.
More than one million electronically level-regulated, sensor-controlled condensate drains from Beko are currently installed worldwide.
With the new maintenance-optimised Bekomat 31/32 variants, Beko aims to reach out even further.
The Bekomat 31/32 units join the current Bekomat range with capacities going up to 100,000cfm. Request a free brochure from Beko Technologies ...
• Beko Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
