Product category:
Fans and Compressors
News Release from: Beko Technologies | Subject: Bekomat 31/32
Edited by the Processingtalk Editorial
Team on 07 September 2007
Maintenance with one swift movement
The new Bekomat 31/32 condensate drains made by Beko Technologies now consist of only two element groups, so that complete maintenance can be carried out with one single movement
The new design results in considerable advantages as far as maintenance and cost-effectiveness are concerned: these are the characteristic features of the new Bekomat 31/32 devices The new generation condensate drains are subdivided into two modules only: the service unit which, in its non-corroding aluminium housing, combines all maintenance components, and the electronic control and sensor unit, which only needs to be installed once
This article was originally published on Processingtalk on 19 Jan 2007 at 8.00am (UK)
Related stories
New design principle for condensate drains
The new design principle used in the Bekomat 31/32 condensate drains just launched by Beko Technologies uses only two parts, offering considerable advantages in terms of maintenance and economics
Measurement is key to eliminating air waste
A new measuring instrument allows comprehensive analysis of the four areas that are decisive for optimising the economic performance of a compressed air system
Caring for your Bekomat condensate drain
It is widely accepted that the Bekomat condensate drain from Beko Technologies is the world's most reliable condensate drain: so why do you need 'Beko Service Direct' to look after it?
Both units are coupled via a practical quick connector.
This concept allows the completely simple replacement of any maintenance and wear-relevant parts by only the fast replacement of the service unit which was checked by the manufacturer.
No tools are required to connect and disconnect either module - a simple hand movement will do.
The ready-for-use service unit has already been pressure and function-tested in the factory.
During its mounting, no further electrical installation or fitting of seals and component parts is required.
This Plug-and-Play principle achieves maximum cost-effectiveness in a minimum of time for the maintenance of the Bekomat 31/32 devices.
In addition, the Bekomat 32 has an alarm function, a switchable potential-free fault message transmission and a remote control function.
More than one million electronically level and sensor-controlled condensate drains made by Beko have already been installed throughout the world.
With these, Bekomat 31/32 devices of course have in common the known advantages: they avoid unnecessary compressed-air losses during condensate drainage, and the condensate housing which, as a standard feature, is made of non-corroding aluminium, ensures operational reliability and durability. Request a free brochure from Beko Technologies ...
• Beko Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
