Product category:
Fans and Compressors
News Release from: Beko Technologies | Subject: Clearpoint filter
Edited by the Processingtalk Editorial
Team on 04 September 2007
Clearpoint compressed air filter
elements
The energy costs introduced by compressed air filtration are proportional to filter pressure drop: Beko Clearpoint filters offer lower pressure drop, and reduce energy consumption
In order to maintain the required operating pressure, the compressor performance has to be stepped up to compensate for the pressure drop introduced by the filtration system The result? Higher energy consumption, greater wear on the compressors and increased costs
This article was originally published on Processingtalk on 9 Feb 2006 at 8.00am (UK)
Related stories
Measurement is key to eliminating air waste
A new measuring instrument allows comprehensive analysis of the four areas that are decisive for optimising the economic performance of a compressed air system
Caring for your Bekomat condensate drain
It is widely accepted that the Bekomat condensate drain from Beko Technologies is the world's most reliable condensate drain: so why do you need 'Beko Service Direct' to look after it?
The solution? Clearpoint compressed air filters from Beko equipped with original Clearpoint filter elements.
Beko filter elements offer competitive benefits to the customer:.
* Clearpoint elements are installed without tie-rods so that the cross-sectional area is fully available.
This reduces the flow resistance, while the space required for element replacement is only about one third compared with other designs - a great advantage under spatially restricted conditions.
* Thanks to the innovative push-fit design of the filter elements, replacement is very fast and simple.
The element is held securely in a leak tight position by an O-ring seal at the top cap and three supports at the bottom of the housing.
* With an extremely high void volume of 96%, the boron silicate filter material ensures that the pressure loss is kept to a minimum.
Conventional filter material of sintered polyethylene only has a void volume of 45%.
With Clearpoint filter elements, the cross-sectional area available for flow is therefore more than twice as large.
* The standard needle felt drainage layer has a higher thermo stability (up to 120C) compared with the foamed plastic used in other filter products.
It is also chemically and mechanically highly resistant and free of silicone. Request a free brochure from Beko Technologies ...
• Beko Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
