Beko system aids chocolate production
Beko has provided a system for production processes at Alfred Ritter chocolate company, the central module being a heat-regenerated adsorption dryer of the Everdry Fra-V 3400C type.
The function of the Fa-V series requires no compressed air, either for the desorption process or for subsequent cooling of the heated desiccant (zero purge), ensuring that 100 per cent of the compressed-air volume flow at the inlet of the system is available for the application.
A Beko heat-regenerated adsorption dryer.
The Beko system also includes: a Clearpoint pre-filter with a Bekomat 14 condensate drain; a heat-regenerated adsorption dryer of the Everdry Fra-V 3400 C type; a water-cooled heat exchanger for the pre-reduction of the compressed-air temperature; an Eversorp EC 2600 oil vapour adsorber to ensure the required freedom from oil contamination; a Clearpoint after filter for the separation of particles; and sterile filtration prior to introduction into the compressed-air system.
Beko's measurement technology permanently monitors the residual oil content in the compressed air.
Not what you're looking for? Search the site.
Tel +44 1527 575778
-
Beko provides re-gas service for R22 dryers
Beko is offering a re-gas service on all R22 dryers that are in good serviceable condition. -
Beko offers Metpoint oil-vapour monitoring system
Beko Technologies is offering the the Metpoint OCV, a residual oil-vapour monitoring unit for the Metpoint measurement technology programme. -
Beko provides replacements for old flanged filters
Beko Technologies has provided custom-made filters for the plant room of Imperial Tobacco in Nottingham, UK, to replace two ageing flanged filters. -
Membrane dryer can be installed at low heights
Beko has introduced the Drypoint M Plus, a membrane dryer with an integrated nanofilter that can operate downstream of compressors. -
Beko introduces measurement technology programme
Beko Technologies offers a comprehensive programme of systems designed to save energy and improve efficiency in the application of compressed air.
Browse by category
- Plant Instrumentation (6585)
- Process Control and Management (3036)
- Communications and HMI (2978)
- Process Plant and Equipment (7472)
- Pressure/temperature regulators, steam traps (159)
- Hydraulics and Pneumatics (336)
- Mixers, Blenders, Grinders and Mills (279)
- Filters and Centrifuges (156)
- Separation and Membrane Systems (173)
- Packaging, Conveyors and Materials Transfer (558)
- Cooling and Heat Tracing systems (39)
- Plant Design and Construction (287)
- Plant Inspection and Cleaning (290)
- Tanks, pipework, nozzles, tube fittings (292)
- Welding, cutting and adhesive bonding (346)
- Couplings, Seals, Gaskets (349)
- Pumps and Pumping Systems (721)
- Metering pumps and dosing systems (232)
- Motors and Variable speed drives (648)
- Fans and Compressors (336)
- Bearings, lubrication, oil and filters (455)
- Robots and positioning systems (120)
- Vacuum pumps and components (37)
- Gas atmospheres and generation (66)
- Containment systems, Leak protection (48)
- Air handling: Dust + Fume extraction (146)
- Metal detection and X-ray systems (132)
- Power supplies and plant cabling (506)
- Powder and Solids Handling (267)
- Boilers, Heat Exchangers, Dryers and Refrigeration (492)
- Processing Industry Events and Services (3624)
- News from specific industry sectors (2846)
- Environment, Pollution + Green Power (900)
- Flow Measurement (947)
- Water Industry News (1552)
