Product category:
Power supplies and plant cabling
News Release from: Block UK | Subject: Block HFM Filters
Edited by the Processingtalk Editorial
Team on 15 January 2008
Power Supply Harmonics: Are you paying
the costs?
Avoid harmonic distortion from power supply lines to eliminate resulting equipment failures and reduce production downtime, repair and replacement costs
Bob Liddle, Managing Director at Block UK, suggests that harmonic distortion on power supply lines can result in hidden costs and increases in plant problems for industrial companies Power supply networks are the life support of modern industry, but their quality and reliability are rarely questioned
This article was originally published on Processingtalk on 5 Jul 2007 at 8.00am (UK)
Related stories
Innovative power supplies offer multiple benefits
A new range of cost effective primary switched, three-phase power supply modules has been launched, offering a range of innovative features, including optional integrated line monitoring
Control panels help minimise production downtime
Block UK and systems integrator MLH Services helped two producers of ready meals minimise production downtime on their spiral freezer conveyor, using a range of panel-installed electrical components
Manufacturers are basically interested only in whether current is flowing or not.
The majority of companies never question how good or bad the quality of the power source they are using actually is.
However, on closer examination, the destructive effects of distortion sources, such as harmonics, can be seen.
Further reading
New book explains motor and drive technology
New book from ISA demystifies motor and drive technology used in today's modern manufacturing processes
Record breaking electric car to go the distance
ABB has found a novel way to put its drives and motors to the ultimate test by providing the main drive system for the British challenger to to the world electric land speed record
Bugs killed by medium pressure UV stay dead!
Bacteria and many other micro-organisms contain enzymes that can repair UV-damaged DNA, a process known as 're-activation': research shows this does not occur with medium pressure UV disinfection
But with the help of suitable harmonic filters, the effects of harmonic distortion can be practically eliminated.
Although the power supply grids in Europe are amongst the most reliable in the world, this does not guarantee the quality of the power they deliver.
Unfortunately, machinery and equipment can fail with no apparent reason, or can deteriorate and need expensive repairs.
In these cases, an analysis of the mains supply is critical, to see whether mains harmonics are possibly to blame.
A PURE WAVEFORM IS RARE.
A pure sinusoidal voltage waveform for which most equipment is designed to operate on is very rare these days in mains supplies.
Harmonics that distort the waveforms have been on the increase in power supply grids for many years.
There are many sources of these harmonic distortions.
One of the first was the mercury steam rectifier, which was used to transfer AC to DC for operating electric train engines and for adjusting the speed of industrial DC motors.
Today, equipment such as variable speed motors, large uninterruptible power supplies (UPS), computers, discharge lamps and B6 bridge rectifiers used in power electronics, are the primary cause of harmonic distortion.
Harmonic distortion on modern power grids can harm equipment in different ways.
For example, vibration and noise levels are annoying symptoms, but their effect on the operation of machines is minimal.
Another effect is from the harmonic distortion present in communication lines and in electronic circuits, which can cause malfunction and fault conditions.
Overheating of transformers, cables, motor windings and in capacitor banks can also be caused by harmonic distortion.
These faults can reduce the life expectancy of machines and equipment, causing unnecessary expense and production downtime for a company.
Harmonic distortion is also a cause for cost explosions in power distribution companies.
On their highly distorted power supply grids, the harmonic distortion can cause up to 300% of the total current in neutral lines.
Mathematically, it is not difficult to prove that harmonic currents have a large proportion of RMS current.
Practically, this effect can also be easily proved.
A first clue is the temperature measurement of the neutral wire.
Only a small proportion of current should be flowing in the neutral wire, however, in many industrial plants and installations, an increase in the temperature of the neutral wire can be seen, which is a definite indication of high harmonic currents.
How do Harmonics Arise? Rectifiers, frequency inverters, UPS devices and electronic power supplies are generally found as loads in all modern power grids.
The current that they draw is not sinusoidal but pulsating.
One cause of this is the pulse current drawn for charging smoothing capacitors.
Inevitably, this results in a reverse current flowing back into the supply grid.
There are numerous national and international standards limiting these harmonic levels to certain values.
For example, DIN EN 61000-4-2; DIN EN 61000-3-12 and IEEE 519-1992.
Unfortunately, in industrial everyday practice, these standards are not always being adopted.
For reliable industrial power distribution, having in the main three phase loads, the fifth harmonic at 250Hz and the seventh harmonic at 350Hz are of primary concern.
Three phase systems such as variable speed drive units and large UPS systems utilise three phase rectifiers (6-pulse bridge).
The order of the harmonics depends on the number of pulses the rectifier has.
For a B6 bridge circuit, the resulting harmonics has the order of V=K*P+/-1 (where K = integer number i.e 1,2,3,4 etc and P = Pulse Number i.e 6 Pulse bridge).
This means that harmonics with the number five, seven, eleven, thirteen, etc are present.
Single phase loads such as computers and monitors in administration buildings generally only produce the third harmonic, which if left undetected could cause fires.
LOSSES ARE HIDDEN COSTS.
In every electrical system, losses are caused by current flowing and magnetising currents.
These are taken into account when calculating the gauge of cables and the size of transformers and drives equipment.
All of these losses have to be accepted, because they cannot be completely eliminated, even with modern technology.
But harmonics cause other losses, including copper and iron losses in transformers and copper wires.
Adding all these losses together means that for a typical industrial company, around 5% of its total electricity bill is comprised of losses.
Until now, very little attention has been paid to these cost factors, mainly due to lack of knowledge or lack of adequate means of monitoring.
Modern supply analysing equipment makes these problems more transparent.
With these aids, it is easier to track down the source of distortion, which is the first step in solving the problem.
Block UK assists its customers, analysing the line supply voltage, and helping to decide which harmonic filter is best suited for the application.
EFFECTIVE LINE PROTECTION.
Up to now, industry has used reactors or active filters to protect the line supply from harmonic distortion.
With both systems, a reduction in the level of distortion can be achieved.
However, both methods have distinct disadvantages.
The effectiveness of a reactor is not always adequate, so reactors only have a limited implementation.
Active filters, however, eliminate harmonic distortion almost completely; the drawback being that the technical expenditure is comparatively high.
Block has developed a third method of dealing with these harmonic distortions - the 'harmonic filter module' (HFM).
During development of the filter module, priority was given to the fifth and seventh harmonics, which cause most problems in industrial applications.
With the harmonic filter the proportion of THD (total harmonic distortion) for any frequency inverter and intermediate circuit using B6 input bridges is reduced significantly, typically by 84% up to 95%.
Depending on the application, a filter can be used either directly in front of the source of the harmonic distortion or as a complete system filter in the distribution cabinet.
Typically, filters are designed for the individual equipment and its harmonic distortion level, which means the design is relatively straightforward.
Normally, a filter is designed for the power rating of the equipment that is causing the harmonic distortion.
In order to optimise the design of the required filter, Block offers an on-site analysis of the power quality.
This information of THD current levels enables a more effective design of the required filter module.
The Block family of harmonic filter modules range from 7kW up to 800kW.
Larger power ratings can be achieved by connecting modules in parallel.
Due to the very high production quality and the use of only high quality components, the system loss caused by the filter module is very low (HFM efficiency is higher than 98%).
A comparison between industrial applications with and without the harmonic filter module, show the advantages of the system with a filter.
The primary advantage of these filters is that they need no servicing and are relatively easy to install.
Practical experience has shown that far fewer fault conditions or equipment failures caused by harmonic are present when harmonic filter modules are installed.
The thermal stress on a transformer and motor windings, installation wiring and premature ageing of electronic circuits, is reliably prevented.
For more information on Block UK's range of harmonics filter modules, please visit the website, or telephone the sales department direct.
• Block UK: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
