Product category:
Conferences and Seminars relevant to Processing
News Release from: BHR Group Conferences | Subject: 15th and 16th March 2005, elastomer/plastic seals
Edited by the Processingtalk Editorial
Team on 14 December 2004
Demand for fluid sealing course
continues
Demand for specialised training in fluid sealing technology means that the BHR Solutions latest training course was oversubscribed, so another course will be run on the 15th and 16th March 2005
Continuing high demand for specialised training in fluid sealing technology meant that the BHR Solutions latest training course was significantly oversubscribed, and another course will be run on the 15th and 16th March 2005 Previous participants from fluid power, aerospace, automotive, oil and gas, valve and pump manufacturers, white goods, medical device and chemical process companies as well as suppliers of sealing systems have all benefited from the 'hands on design' format of the course
This article was originally published on Processingtalk on 2 Sep 2004 at 8.00am (UK)
Related stories
BHR Fluid Sealing Conference call for papers
The 1996 Integrated Pollution Prevention and Control Directive from the EC requires designated industrial installations to be fully compliant and authorised by permit to operate by 30 October 2007
The practical content is aimed to help manufacturers and operators who are becoming aware of the need to build in reliability at the design stage as the cost and safety implications to industry of seal failures is totally out of proportion to the component cost.
Participants have access to experience and research in sealing and containment technology developed over 25 years and are encouraged to discuss their own design problems.
Sealing and containment technology is one of the cornerstones of expertise at the Fluid Engineering Centre, the BHR Group headquarters at Cranfield.
For more than 25 years, BHR Group has run variations on this short course as a broad based introduction to the subject.
The next course, specifically on elastomer and plastic seals, will be held at Cranfield on 15th March 2005, followed by an optional half day on gaskets on 16th March.
• BHR Group Conferences: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
