Product category:
Humidity and moisture sensing systems
News Release from: Brownell | Subject: humidity adsorbers
Edited by the Processingtalk Editorial
Team on 24 January 2008
Humidity adsorbers give assured
protection
Brownell panel mounted humidity adsorbers have been designed to protect all kinds of electronic and electrical equipment and systems against corrosion, dampness and contamination
Panel mounting humidity adsorbers give assured protection Brownell panel mounted humidity adsorbers have been designed to protect all kinds of electronic and electrical equipment and systems against corrosion, dampness and contamination by reducing any existing or incoming moisture to acceptable levels, with the added safety of integral indicators that monitor saturation and indicate when reactivation or replacement is required These plastic units use powerful adsorbing agents in either silica gel or molecular sieve form
This article was originally published on Processingtalk on 20 May 2005 at 8.00am (UK)
Related stories
Brownell NEPS1000 Advantage dry gas purge units
Brownell has introduced a dry nitrogen and gas purge improver, NEPS1000 Advantage, which can be used with most dry gases including argon, helium and SF6
They are blue when the humidity adsorber is dry and turn pink when the maximum amount of moisture has been adsorbed.
The silica gel humidity adsorbers can be reactivated for re-use by heating them at 120C (248F) for four hours in a ventilated oven.
Molecular sieve adsorbers maintain an ultra-low relative humidity for extremely sensitive applications and cannot be reactivated.
They are recommended for use on equipment or enclosures that may be subject to operation at low temperatures and wherever any chance of water vapour condensation must be positively eliminated to prevent possible immediate failure. Request a free brochure from Brownell ...
• Brownell: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page

