Product category:
Test equipment
News Release from: Burster | Subject: Resistomat model 2320
Edited by the Processingtalk Editorial
Team on 11 December 2007
Hand-held Milliohmmeter for field
applications
With its Resistomat model 2320, burster offers a sturdy and universally applicable milliohmmeter for the measurement of low-ohmic resistances in mobile service, lab and field applications
The 800gram light and handy resistance measurement device is powered by a rechargeable battery pack or standard batteries The easy to operate milliohmmeter with its stable IP54 plastic housing and membrane keypad is predestined for measurements on resistance elements, power rails, transition resistances on plugs, switches, transformer and motor coils as well as cables and wires
This article was originally published on Processingtalk on 13 Dec 2007 at 8.00am (UK)
Related stories
Profibus interface offers process control
In many sectors of fieldbus industrial automation, a speedy and safe process control with high measuring accuracy is needed: the burster Sensor Profibus Interface 9221 provides the answer
Documenting calibrator for QA systems
Quality assurance systems for production processes require the regular recalibration of mechanical, electrical and thermal measurement equipment with documentation of the results
The Resistomat model 2320 performs single and permanent measurements, whereby the measuring changeover from 40mOhm at 10uOhm resolution up to 4000kOhm may be done either automatically or manually.
The measuring accuracy is < 0.05%rdg plus 2 counts.
Unipolar and bipolar measurements are possible.
On temperature dependent test objects the temperature can be measured in combination with a Pt100 sensor and the object resistance is subsequently compensated to fit the value at 20C.
The temperature coefficients for copper and aluminium are included as standard, two more coefficients may be set individually for any given material to be measured.
The input voltage protection is dimensioned for voltage peaks up to 415 Vrms which is of advantage especially for the measurement of inductive test objects.
The resistance value calculated in the current-voltage method is shown on the large LCD display directly in mOhm, Ohm or kOhm.
Low battery charge is indicated by LEDs as "LOBAT".
The battery pack can be replaced in a very simple manner and recharging is done in an external loading station.
The Resistomat model 2320 is supplied including batteries and calibration certificate.
Optionally available are Pt100 temperature sensors, Kelvin measuring pliers and probes, clamping devices and calibration resistances.
Further accessories are rechargeable and spare battery pack with external loading station and a practical carrying bag.
• Burster: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
