Product category:
R&D, Test and Evaluation Services
News Release from: Calibration Trade Centre
Edited by the Processingtalk Editorial
Team on 26 October 2005
New high air flow and anemometer
calibration rig
A high capacity air flow and anemometer calibration rig has been added to the new recently acquired premises at the Calibration Trade Centre
A high capacity air flow and anemometer calibration rig has been added to the new recently acquired premises of the Calibration Trade Centre With a purpose built 200 mm diameter test section and 30 metres in length, the flow rig is capable of calibrating air volume and mass flow meters at flowrates up to 1000 litres/second or 4000 kg/hr
This article was originally published on Processingtalk on 5 Nov 2003 at 8.00am (UK)
Related stories
Brunata energy monitoring expertise hits the UK
The Danish energy monitoring provider, Brunata, recently established a UK base with the service provider "Calibration Trade Centre", of West Sussex, to supply energy metering equipment and services
The calibration rig has facilities to provide various outputs, including pulse counts, frequency, analogue and pressure drop parameters.
The rig has been specially developed to cover the requirements of high air flow meters used for Formula 1 aerodynamics research, truck engine development and the power generation industries, but has also accommodated tests and services for the bulk solids blowing and building leak testing sectors.
This new facility is in addition to the 1 m x 1 m wind tunnel test section currently housed on the ground floor of the test laboratory, giving an anemometer calibration range capability of 0.2 - 50 m/s across the two calibration facilities.
• Calibration Trade Centre: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
