Visit the Endress + Hauser web site
Click on the advert above to visit the company web site

Product category: Signal conditioners, isolators, modems
News Release from: Celsum Technologies | Subject: DSC Digital Strain Card
Edited by the Processingtalk Editorial Team on 29 July 2003

Strain Card connects sensors to PC/PLC
directly

The DSC Digital Strain Card is a cost-effective and compact conditioning amplifier which allows a strain gauge device, ie load cell, pressure transducer or torque sensor to be connected to a computer

The DSC Digital Strain Card, available from Celsum Technologies, is a cost-effective, highly accurate, compact and robust conditioning amplifier which will allow a strain gauge device such as a load cell, pressure transducer or torque sensor to be connected to a computer or PLC system without the need for an expensive analogue-to-digital card All that is needed is a 12V DC power supply, and a strain gauge device with an impedance of 320 ohms to 1,200 ohms

The DSC is available in RS232 and RS485 serial communications formats, with a choice of protocols from ASCII, Modbus, Mantrabus and CANOpen.

The device has an integral temperature sensor, and may be programmed for multi-stage linearity and temperature compensation.

The resolution may be selected from 19 bits (1 part in 500,000) at a speed of 1 reading per second to 15 bits (1 part in 30,000) at 100 Hz, with low noise and high stability.

RS485 versions may be individually addressed on the same bus.

Two easy-wire junction boxes simplify field installation; the DSJ1 will accept one DSC card, and the DSJ4 will accept up to four of the RS485 versions.

An evaluation kit is available, with a DSC of your choice.

The devices carry a three-year manufacturer's warranty, and can normally be delivered from stock. Request a free brochure from Celsum Technologies ...

Celsum Technologies: contact details and other news
Email this article to a colleague
Register for the free Processingtalk email newsletter
Processingtalk Home Page

Search the Pro-Talk network of sites

Visit the Endress + Hauser web site