Product category:
Shutdown, SIS and safety systems
News Release from: Comitronic | Subject: CO13XXL
Edited by the Processingtalk Editorial
Team on 25 January 2005
Module controls emergency stop buttons
The safety module CO13XXL is designed to control emergency push buttons: mountable on a DIN rail, it has 2 NO safety lines and one NC auxiliary line with a switching capacity of 8A/250V each
The safety module CO13XXL is designed to control emergency push buttons It can be managed in monochannel (category 2 according to EN954-1) or in dual channel (category 3 according to EN954-1) depending on the wiring
This module has 2 NO safety lines and one NC auxiliary line with a switching capacity of 8A/250V each.
The response time is less than 20ms.
In a 22.5mm wide case only, this module (supplied by 24VAC/DC) includes plug in terminal blocks and is mountable on a DIN rail.
A 120/240V version is available in a 45 mm housing.
The CO13XXL has 3 LEDs : one for the power on, two others relating to contacts of the safety lines.
You can select the reset mode by a dip switch located at the back of the module.
Two different modes are available : manual or automatic mode.
The life expectancy of the module is 10 millions of mechanical operations.
• Comitronic: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
