Product category:
Sludge Handling and treatment
News Release from: Corus Northern Engineering Services | Subject: Sealing techniques at Sellafield
Edited by the Processingtalk Editorial
Team on 05 March 2008
Effluent risk reduction at Sellafield
plant
Innovative sealing and deployment techniques utilised by Corus Process Engineering (CPE) on sludge and effluent lines associated with the Magnox storage pond will improve safety and save costs
In April 2006, Sellafield commissioned CPE, part of Corus Northern Engineering Services, to provide a sealing solution for its two-off sludge and effluent (RESPS) lines, which connect the Magnox storage pond to the effluent tank Due to the potential risk of a hydraulic 'link' between the two plants, the isolation or sealing of these lines is critical in order to enable the early start of the sludge and effluent removal from the Magnox Storage pond
This article was originally published on Processingtalk on 2 Oct 2006 at 8.00am (UK)
Related stories
Saving five weeks of production at Corus
When it comes to monitoring the condition of critical, slow-moving (0.25-80rpm), high capital value plant and machinery, companies really need to consider the benefits of acoustic emissions monitoring
Precision machining to keep Flying Scotsman flying
Important cylinder and bearing refurbishment work on Britain's most treasured steam locomotive, the Flying Scotsman, was completed recently with help from a UK-based engineering company
The scope of work was to successfully develop and demonstrate a method of sealing the RESPS lines, which are located approximately seven metres underwater, within the Effluent Tank Sludge Sump and four metres underwater within the Effluent Tank Inlet Chamber.
Sellafield and CPE utilised knowledge gained from a previous collaboration on the Magnox Pond RESPS project in early 2006, which involved the development of various grout and resin sealing techniques for other RESPS pipelines.
After numerous trials, recommendations were made for the use of a special technique sourced from Steve Vicks International.
Further reading
Wash-down facility is environmentally compliant
A new vehicle wash down unit has been introduced at Corus' Teeside plant, to clean vehicles and trailers up to 54 tonnes: this is also fully compliant with ISO 14001 environmental standards
Excellent project in blower control system upgrade
Corus Automation Solutions has been awarded a Project Excellence Award from Pantek, for a recent blast furnace turbo blowers control system upgrade project at Corus Scunthorpe
New industrial locomotives launched
Corus Northern Engineering Services unveils its brand new range of British-designed and manufactured locomotives, the first of this type of locomotive to be manufactured in the UK for over 15 years
This technique, which has proved successful for the RESPS project, was taken as the basis of the solution to be developed for the sealing of the RESPS lines into the Effluent Tank.
The challenge for CPE was to find an innovative method of allowing all the new trialling work and safety case documentation to be completed within a certain timescale.
In order to achieve this, it was decided to co-locate the project teams at the CPE Workington test facility and use the existing test rig, which had been constructed for the previous RESPS project.
This strategy has enabled significant savings to be made in terms of both the time and cost associated with constructing a brand new facility.
In addition, utilising CPE allowed the project to draw on the knowledge gained from the RESPS project.
All manufacturing, testing and development was carried out at the CPE facility, again saving time and enabling immediate feedback on trialling and test data.
From the results of the initial trials at CPE Workington, it was quickly established that the initial technique identified would be suitable for the application.
However, the dry foam bag sealing approach requires dry conditions within the pipework for the system deployment.
To achieve this would require additional work and time by the implementation team in a hazardous environment at Sellafield.
Therefore, in parallel, the project team, in conjunction with CPE and Steve Vicks International, has developed a new system that gives greater confidence in the function of the seal and also greatly reduces the time it will take to perform the isolation on site and as such reduced the dose burden that make this such an onerous task.
Chris Cunningham, Project Manager at Sellafield comments: "The project was very successful and represents a major risk reduction exercise for the Sellafield site.
In terms of safety, the new sealing technique provides the plant with a step change in risk reduction and negates any potential fault scenarios with the effluent and sludge tank systems.
CPE was a key member of the project team and has enjoyed a strong working relationship with Sellafield for many years now".
The approach taken on this project will realise an acceleration of the Effluent Tank remediation programme of approximately two years, with corresponding cost savings.
The solution to be implemented will have additional safety benefits in terms of reduced operator dose uptake during implementation, as the pipes no longer have to be drained of liquor before the sealing mechanism is deployed".
Stuart Pegler, Project Engineer at CPE comments: "Potentially, the new sealing and deployment technique has many other plant applications at Sellafield and may offer opportunities as a technical solution in the remediation and decommissioning of facilities across the site".
The work undertaken involved a large number of local suppliers, all of whom are playing a significant part towards the successful outcome of this project, including Derwent Fluid Power, Unblock Cumbria, Hewdens Hire, REACT, PKA, Lloyds Kone Crane, Yarl Hydraulics, SLB Pumps, Tubros Engineering, Westlakes Engineering and Carlisle Hydraulics. Request a free brochure from Corus Northern Engineering Services ...
• Corus Northern Engineering Services: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
