Product category:
Hazardous area interfaces, Enclosures
News Release from: Cooper Crouse-Hinds | Subject: HA lighting et al
Edited by the Processingtalk Editorial
Team on 22 May 2008
HA equipment protects workers from dust
problems
A range of hazardous area equipment, including fluorescent emergency lighting units, stop-start pushbuttons, connectors and terminal boxes is being used on dust containment booths
These booths, from Extract Technology, are used in the pharmaceuticals, chemicals and biotech markets Based in Huddersfield, Extract Technology designs and manufactures a range of 'Downflow Containment Booths', which are used extensively in the pharmaceuticals industry
This article was originally published on Processingtalk on 15 Aug 2008 at 8.00am (UK)
Related stories
Electrical equipment in hazardous areas
Not all hazardous area electrical equipment, approved for use under a certain ATEX classification, is equal: beware of the X suffix on the certificate number, which will mean extra costs for the user
Plug-and-socket connectors for Exd equipment
The eXLink range of Ex-approved plug-and-socket connectors from Cooper Crouse-Hinds enables the connection and disconnection of live Exd approved electrical apparatus without a 'Hot Work Permit'
The booths safeguard operators against harmful dusts that are generated during manual powder handling operations.
Clean air from the ceiling plenum is distributed evenly across the whole of the work area, pushing any respirable dust downwards, away from the operator breathing zone.
As the dust moves down to a low level, the high velocity exhaust grilles direct the dust into the filters.
Further reading
Free guide on measures to prevent dust explosions
A free, informative guide is now available, which outlines the facts, risks and steps required by industrial companies to help prevent dust explosions in their plants
Explosion-proof controls for loading dry materials
A range of hazardous area equipment for use on loading systems for handling dry, potentially-explosive bulk materials, including cement, alumina, sugar, petroleum coke, grain and sulphur
Combustible dust accidents reported by OHSA
This article presents examples from an OSHA report on 'Combustible Dusts in Industry' to illustrate the hazards of dust explosions, in relation to the current DSEAR requirements for hazard assessments
This on-board filtration system then removes the dust before returning the clean air into the ceiling plenum.
A small amount of air is exhausted after the filters, thereby creating a slight negative environment.
Inward air movement into the booth at low level ensures containment.
Extract Technology also supplies a range of glass containment booths, powder handling benches, rigid and flexible isolators for containing potent compounds and aseptic processing.
Julian Naylor, Controls Department Team Leader at Extract Technology comments: "For more than 25 years, Extract Technology has specialised in the design and manufacture of dust containment booths.
These high quality systems demand high quality components to be sourced from our suppliers.
We regularly buy hazardous area equipment, including lighting, control equipment and terminal boxes from Cooper Crouse-Hinds (via authorised distributor Scattergood and Johnson) because we are confident the equipment will do the job and meet the stringent quality standards of our customers".
On its downflow containment booths, Extract Technology uses a range of hazardous area, explosion-proof equipment from Cooper Crouse-Hinds.
This includes the eLLK 92 range of explosion-proof light fittings, as well as stop-start pushbuttons, terminal boxes and connectors.
"The safety of the person working in the booth is paramount and so we use the best hazardous area products on the market, since we cannot afford to cut corners here," explains Batty: "For a typical, 1.5 metre-wide downflow containment booth, between two or three lighting units are required.
For a larger, 6 metre-wide booth, around 10 to12 lighting units will be used.
The number of power sockets, terminal boxes and connectors depends on the customer's individual requirements.
These days, the end user will normally specify what type of hazardous area equipment it requires on the booth, whereas for smaller customers, we tend to decide what products best meet the specification.
We work with all the big pharmaceuticals and chemical companies, including GlaxoSmithKline, AstraZeneca, Eli Lilly, Pfizer and Novartis".
The Cooper Crouse-Hinds eLLK 92 range of fluorescent lighting units are available for ATEX Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas.
The lighting units come in 2, 4 or 5 feet lengths, with twin lights.
The 2 and 4 feet versions can be supplied as emergency lighting.
These versions have an 'intelligent' NIB battery fitted, which monitors the lighting, providing onboard maintenance with LED indication for 'capacity' and 'faults'.
The eLLK 92 fluorescent lighting units are designed with a glass fibre-reinforced plastic enclosure and a polycarbonate protective bowl.
The units are protected to IP66 (EN 60529).
Permissible ambient temperatures are from - 20C up to +50C.
In addition to supplying systems and components certified for ATEX environments, Cooper Crouse-Hinds also offers hazardous area equipment to IEC and NEC standards, as well as other international approvals for Eastern Europe, China and North America.
• Cooper Crouse-Hinds: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
