Product category:
Positioners, servo drives
News Release from: Copley Controls Corp | Subject: Accelnet
Edited by the Processingtalk Editorial
Team on 09 May 2007
EtherCAT-compatible ultra-fast servo
drives
New state-of-the-art open standard EtherCAT-compatible Accelnet servo drives operating on an ultra-fast network enable centralised control to command tightly coupled robotics axes
The new EtherCAT Servo Drives, which deliver 18A and 36A peak, respectively, combine Accelnet versatility and Ethernet speed for centralised control of multi-axis automation The drives enhance the performance of distributed motion control systems too
This article was originally published on Processingtalk on 31 May 2007 at 8.00am (UK)
Related stories
Compact linear motors get direct to the point
A compact new direct drive linear motor combines a slim form factor with high speed and 25g acceleration, shrinking the size of any pick-and-place systems
Direct-drive linear motor shrinks pick-and-place
Copley Controls makes decisive automation advances with its new ServoTube small-silhouette STB11 linear motor: high force and low mass produce 25g acceleration for snap-action responsiveness
High perfomance multi-axis robotic arms often require real time servo-loop adjustments in response to loads being lifted and arms extended.
Motion on one axis can also affect loading on other axes.
Optimal control of multi-axis robotic arms is best achieved with a centralised controller that handles path planning and manages all position and velocity control loops.
Further reading
Linear actuator with compact design
Copley Controls broadens its line of direct drive ServoTube linear actuators with the highly compact Model STA11, which creates a 10-actuator assembly less than 12 inches wide
New compact linear actuator exceeds speed limit
A new high speed industrial linear actuator has been launched, with a specially designed low profile body, making it more compact so that it can be easily integrated into confined spaces in machines
The controller commands high bandwidth current loops within each arm-positioning drive.
Such centralised control places a heavy burden on the communication network between controller and drives.
EtherCAT ultra fast data transmission enables 100 drives to be updated in less than 100usec.
The new drives, parts AEP-90-18 and AEP-90-36, drive brushless and brush motors and run on 20 - 90V DC power.
Adding EtherCAT compatibility to the Copley Accelnet drives provides a potent combination of speed and operating modes, including torque, velocity, trajectory tracking, point-to-point and homing.
Multiple choices for encoder feedback include Endat 2.2, Hiperface, incremental, and analog encoders.
Copley supports the new drives with comprehensive software tools that capitalise on the CANopen DSP-402 device profile of EtherCAT.
All network management is taken care of automatically by a few simple commands.
Copley supports two levels of development environments.
Copley Motion Libraries (CML) link into a C++ application program.
Copley Motion Objects (CMO) are COM compatible objects for Visual Basic, NET and LabVIEW.
Copley also speeds the system designer's task with highly intuitive downloadable software tools.
A Java-based drive configuration environment provides auto tuning and makes system setup and commissioning fast and simple.
The software also includes powerful oscilloscope, function generator, and diagnostic tools.
The new drive's dimensions are 7.7" x 3.9" x 1.2" or 196 x 3.9 x 1.2 mm.
Interfaces include two 100BASE-TX ports, analogue +/-10V inputs, as well as multiple digital inputs and outputs.
Applications EtherCAT-compatible AEP-90-18 and AEP-90-3 Accelnet drives enable robotics designers to upgrade system throughput.
EtherCAT's superior speed enables central controllers to maintain path planning for high speed systems, close velocity and position loops of tightly coupled multi-axis robotics automation.
• Copley Controls Corp: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
