Product category:
Trade effluent monitoring + on-site treatment
News Release from: Castrol UK | Subject: Perkins waste plant
Edited by the Processingtalk Editorial
Team on 22 June 2006
Castrol cuts cutting fluid disposal by
80%
A cutting fluid reprocessing facility, installed and managed by Castrol, has cut waste fluid disposal by more than 80% at the Perkins Engine plant in Peterborough
A cutting fluid reprocessing facility installed and managed by Castrol, has cut waste fluid disposal by more than 80% at the Perkins Engine plant in Peterborough Perkins Engines, part of the engines division of Caterpillar, is a major supplier of diesel engines for the industrial, agricultural and power generation markets, with UK manufacturing plants in Peterborough and Stafford and a manufacturing location in Curitiba, Brazil
This article was originally published on Processingtalk on 8 Apr 2003 at 8.00am (UK)
Related stories
High performance zinc-free hydraulic oils
The high performance, environmentally friendly option: Steve Travell, of Castrol Industrial, examines the compelling reasons why hydraulic engineers should specify zinc-free hydraulic oils
Castrol offers audit for oil storage compliance
Castrol Specialised Industrial is offering an Oil Storage Audit for companies concerned by the implications of the new UK Oil Storage Regulations introduced on 1st March this year
The two transfer systems at the Peterborough plant have an annual output of 20,000 cylinder heads and cylinder blocks.
A cylinder head machining line supplied by Renault produces 80,000 units.
And a bearing cap machining facility produces 150,000 sets for a variety of different engines.
Further reading
No more barrels of oil at Ford Dagenham
After Castrol was awarded the sole supply contract for lubricants at Ford Dagenham three years ago, they surveyed the demand, designed a tank farm and oil use strategy to rationalise usage
Cold rolling specialist saves UK PDS 30k pa
By changing to Castrol, cold rolling specialist JB and S Lees is saving UK PDS 30,000 a year, and improving the working environment for its mill operators
Castrol Total Fluid Management works at Land Rover
Six years ago, following many years as one of a number of suppliers to the Land Rover Solihull plant, Castrol was awarded the Total Fluid Management (TFM) contract for their Powertrain operation
Perkins has been a Castrol customer for more than ten years and currently uses Alusol XTH soluble cutting fluid to machine cylinder heads and cylinder blocks at the Peterborough site: Castrol supplies metalworking fluids and services to other Caterpillar sites in the UK.
Four years ago the company adopted Six Sigma methodology and applied the system to evaluate the potential for outsourcing fluid management.
Following the review, which included proposals from the existing cutting fluid suppliers, the company concluded that a total fluid management programme would not benefit the business.
However, some of the specific proposals put forward in the Castrol proposal were of interest, and the company decided to progress them in a separate working partnership.
Initially the partnership focused on a specific project, and Castrol was awarded a contract to install and manage coolant reprocessing and laundering equipment in the main metal cutting facility responsible for producing cylinder blocks and cylinder heads.
The performance of the 3-year contract exceeded expectations by generating a substantial cost saving and, more importantly, a significant reduction in the amount of waste cutting fluid that needed disposal.
Commenting on the project, Perkins manufacturing manager Chris Baty-Symes explains that the waste fluid volume was actually reduced from 466,000 litres to 45,000 litres, a reduction of over 90%, adding that whilst cost savings are important, meeting the demanding target of zero emissions to landfill by 2010, set by the Caterpillar environmental policy, was an even greater incentive.
"We expected the environmental benefits to be at least 'cost neutral'," he says, "but this was a major environmental improvement that was 'cost beneficial' and meant that the equipment paid for itself within the three year contract period".
He added that the waste reduction improvements achieved in the first twelve months of the partnership with Castrol, not only met the Perkins 2003 target, they also enabled the company to meet its 2006 targets two years ahead of schedule! Needless to say, Castrol retains its contract and continues to manage the reprocessing and laundering system for Perkins.
And, having demonstrated the effectiveness of the products and the technology that it brought to the partnership, Castrol is now working with Perkins to investigate other opportunities to improve the way its fluids are managed.
Castrol contract manager Adam Cavanagh explains that the gains are mutual.
"We are not selling product, we are selling solutions.
The contract we have with Perkins enables us to generate revenue even though we are supplying less cutting fluid.
And it helps us to meet our environmental obligations as part of the BP Group".
Summing up the relationship Chris Baty-Symes says it is very professionally handled by Castrol, who are extremely focused on the activities they are supporting.
"They have delivered tangible results that are not just financial.
Thanks to the close working partnership we are now disposing of less than 10% of the fluid that previously left the Peterborough site as waste, and that is a huge environmental benefit".
It is also a working relationship that both parties feel will produce further benefits in the future.
• Castrol UK: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
