Product category:
Telemetry, data acquisition + loggers
News Release from: dataTaker | Subject: DT800
Edited by the Processingtalk Editorial
Team on 09 January 2004
DT800 used in train third rail height
measurement
A dataTaker DT800 high speed data logger is part of the Atkins Rail-developed train-based system for the dynamic measurement of third rail height, chosen because of its speed and flexibility
A dataTaker DT800 high speed data logger is part of the Atkins Rail-developed train-based system for the dynamic measurement of third rail height The dataTaker DT800 data logger is ideal for many monitoring applications and was chosen by Atkins Rail for this application due to its speed and flexibility
This article was originally published on Processingtalk on 27 Nov 2003 at 8.00am (UK)
Related stories
Fast data logger used during oil rig maintenance
Carrying out maintenance on an oil rig is one of the most demanding requirements, needing absolute reliability and rugged construction: dataTaker DT800 was used to monitor well pressure
Logger monitors building site earth movements!
GBG Structural Services use the dataTaker DT800 data logger to monitor possible earth movement adjacent to a demoliton and construction site, where a Church structure was to be unaffected
Operators of trains in third rail areas can experience damage to shoe gear, resulting in service delays, due to gapping of the train.
Many causes can be attributed to this damage, the major factor being the condition of the third rail and running rail support ballast.
Considerable stress is put upon the shoe gear if the third rail height is too high.
Further reading
Logger used on trains to monitor braking systems
A leading supplier of equipment to the rail industry has chosen the dataTaker DT800 data logger to monitor and record performance of its braking systems.
Data loggers with Pocket PC and Bluetooth modules
A key research laboratory has been applying dataTaker DT800 data loggers with Pocket PC and Bluetooth modules to monitor and record the environmental conditions within clean rooms
If too severe, the shoe gear limit beam will crack with possible eventual loss of the gear.
Generally it is not possible to pinpoint the actual location of the track which initiated the problem, as site surveys are often inconclusive since they are undertaken when no trains are running over relatively small areas.
Benefits to the operator include the speed of the system and flexibility, as the third rail voltage can also be monitored during the same test run.
The system is linked to the train speed pulse generator, enabling track distance to be accurately measured at specific distance intervals, irrespective of train speed.
The system is capable of taking a measurement every 0.5 m.
For high speed data logging, the DT800 can sample up to 130,000 data points.
Up to 42 analogue channels and 16 digital channels can monitor DC and AC voltage, current, resistance, temperature, bridges, strain gauges, and 4-20mA loops and frequency.
ATA Flash PC cards provide removable data storage with battery-backed RAM to prevent any loss of data.
Digital outputs can control equipment and raise alarms.
For enhanced reliability, the DT800 has built-in, self-correcting features and will test sensor integrity and flag suspect data.
Event management facilities provide performance analysis and problems can be identified by rapid sampling and alarming across channels.
Data manipulation includes statistical functions, calculations and sensor calibration.
Alarms can be set for all channels.
The dataTaker DT800 has a wide array of functions but is simple to install and operate and is very fast.
Data can be downloaded to a computer via direct RS232, modem, radio or satellite links.
Ethernet and PC card interface adaptors are standard features.
DeLogger software can be adapted to suit each application to give an immediate visual presentation for fast access to information and results.
• dataTaker: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page

