Product category:
Telemetry, data acquisition + loggers
News Release from: Data Translation | Subject: Free software
Edited by the Processingtalk Editorial
Team on 18 October 2005
Free software with data acquisition
hardware
Data Translation are shipping free software with all their data acquisition hardware products, including the ECONseries modules, data acquisition boards and USB modules
Data Translation are shipping free software with all their data acquisition hardware products, including the ECONseries modules, data acquisition boards and USB modules This means that which ever product you buy you will have software that you can use to acquire data from day one
This article was originally published on Processingtalk on 8 Aug 2005 at 8.00am (UK)
Related stories
32 channel 500 KHz data acquisition USB module
Data Translation has developed a new version of its popular DT9834 Series of High Performance USB modules, helping to maintain its leadership in the USB data acquisition sector
DT Vision Foundry supports 21CFr Part ll
Data Translation is now shipping version 3.7 of its DT Vision Foundry software, providing added functionality to support FDA 21 CFR Part 11 requirements for this machine vision software
The ECONSeries products are an expanding series of low-cost USB modules which were launched earlier in 2005.
They allow real plug and play flexibility and come with the powerful GO! software which provides economical, multifunctional instruments for the USB bus.
Simply install the software, connect your module to any USB port, and GO! ECONseries modules are available in a number of configurations to offer the maximum flexibility - select the number of analogue and digital I/O channels, the resolution you need, and the signal range required by your application.
Further reading
USB data acquisition modules cut costs by over 50%
Two new additions to the Data Translation ECONseries of low-cost USB modules are designed to cut costs per channel by over 50% for applications requiring higher numbers of input channels
High performance 12 input channel USB module
Data Translation is now shipping the DT9836 series of simultaneous analogue input multifunction data acquisition modules for USB 2.0
Matlab support for simultaneous USB modules
Data Translation recently announced Matlab support for the new DT9836 Series of simultaneous analog input multifunction data acquisition modules for USB 2.0
The GO! software is ideal for measurement applications right out of the box.
The ECONseries can be used with other Data Translation software including the DT Measure Foundry software suite, the Data Translation drag and drop test and measurement application builder.
Most of the software is available as free downloads from the website; you can even download an evaluation of DT Measure Foundry to try out your more demanding applications before you buy.
All other PCI data acquisition boards and USB modules from Data Translation are shipped with the Data Acquisition OMNI CD in the box.
The Data Acquisition OMNI CD introduces you to the leading software for data acquisition and provides you with the tools you need to set up your Data Translation data acquisition board, to develop data acquisition applications and to integrate your data acquisition hardware into your existing application.
This robust software bundle includes an evaluation of the Data Translation drag and drop test and measurement application builder software, DT Measure Foundry.
It also includes 32 bit WDM device drivers for all Data Translation PCI and USB data acquisition boards, as well as a DataAcq SDK software development kit and Quick DataAcq, a ready to run application.
The CD includes video tutorials and executable example programmes with source codes.
You will benefit from the ease of use and versatility of the Data Acquisition OMNI CD.
You can use the applications straight out of the box and be up and running very quickly.
If you need to create customised applications the OMNI CD also lets you evaluate the DT Measure Foundry software suite and see how easy it is to use.
The OMNI CD contains example programmes and multimedia tutorials for DT Measure Foundry and example programmes for the DataAcq SDK.
If you need to know more about the data acquisition options from Data Translation or you need advice on which product is best suited to your application then contact us.
Our experienced sales and technical support staff can recommend the best hardware and software for your project.
We offer both pre and post-sales advice to help you get the best out of your Data Translation data acquisition products.
• Data Translation: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
