Product category:
Condition monitoring and vibration analysis
News Release from: Environmental Equipments | Subject: Model 1070
Edited by the Processingtalk Editorial
Team on 29 May 2007
Tough vibration transducer can take the
heat
The Environmental Equipments Model 1070 industrial vibration transducer is the tough guy of the vibration transducer world unaffected by temperatures between - 20C and +500C
The Environmental Equipments Model 1070 is ideal for vibration monitoring in the harshest industrial conditions The stainless steel casing of the transducer and the permanently attached signal conditioning unit (SCU), with 500g high shock tolerance, makes the transducer suitable for continuous machine condition monitoring applications where long term signal reliability is essential
This article was originally published on Processingtalk on 23 Nov 2006 at 8.00am (UK)
Related stories
Vibration transducer for industrial applications
The Model 1074 range of rugged industrial vibration transducers from Environmental Equipments has been designed specifically for use in harsh, heavy plant applications
The acceleration range of +/-50g at 10Hz to 3kHz and vibration range of 50 mm/sec at 10Hz to 1kHz are combined with low magnetic sensitivity.
Both acceleration and vibration signal outputs and power input are via a four-pin connector on the SCU.
Signal output is 100mV/g for acceleration and 10mV/mm/sec for vibration with output impedance of 300 ohms.
The transducer, weight 500gms, is supplied with four M4 clearance mounting holes in the base.
The system is fully electrically isolated and requires power supply of 25mA at 24-30Vdc regulated.
• Environmental Equipments: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
