Product category:
Building management systems
News Release from: Elesta UK
Edited by the Processingtalk Editorial
Team on 06 March 2006
Elesta launches operations in the UK
Elesta, the well respected, truly independent, German building management supplier, has been launched in the UK: the whole company will be on show at the Light and Building Exhibition in Frankfurt
Elesta, the well respected, truly independent, German building management supplier, has been launched in the UK Established over 50 years, Elesta operates exclusively through sales partners
This article was originally published on Processingtalk on 22 Jul 2003 at 8.00am (UK)
Related stories
AMEC enhances shutdown and maintenance services
AMEC, the international engineering services company, has strengthened its services to the oil, gas and process markets with the acquisition of Wrights Engineering (UK)
Applied Control Technology Consortium in Glasgow
The Applied Control Technology Consortium (ACTC) helps companies pursue a policy of understanding and appropriately applying control technologies, based on expertise in Strathclyde University
Competent, trained and supported system integrators - their partner companies - take care of control systems for heating, ventilation and air conditioning projects from advice on system design through to commissioning and maintenance.
Elesta makes sure that customers are offered the latest technology and an efficient service.
Sales partners assist in the drawing-up of specifications, based upon individual needs looked at from the point of view of minimising the use of energy whilst at the same time having high levels of convenience and strict cost management.
Further reading
Free control valve brochures in Chinese available
AMOT has produced its first control valve product brochures in Chinese, to support the company office near Shanghai, China, and its increased activity in the region
New website and unveils new company identity
AMOT has launched a new website and the company has also unveiled a new AMOT corporate identity and logo reflecting its global strategy to market their capability within the rotating equipment market
VisualPlant European Training and Support Centre
"Executive Manufacturing Technologies" (EMT), the maker of the leading off-the-shelf Manufacturing Intelligence solution "VisualPlant", and ATS, announce an extension of their collaboration
Elesta UK has a base in the Thames Valley and the founder and staff have over 50 years experience in the building management market.
It will operate through a network of System Partners throughout the UK and Ireland.
Already a network is being established with a number of selected System Partners being trained in the Elesta training centre in Konstanz, Germany.
Within weeks of the trained System Partners return to the UK all secured their first project orders using Elesta products.
A full range of products are available in the Elesta Contolesta product family for small, medium and large installations.
Advantages include: Small low cost controllers; Intranet and internet technology; PC network technology; Standard communication technology; no expensive programming tools are necessary.
In addition, many protocols are built-in as standard, including Modbus, WILO and Grundfos pumps, M-Bus, SMS and GSM, Belimo MP-Bus and Fidelio hotel management system.
* The Trick With The Click! One of the products in the Elesta product family Contolesta which is already taking the market by storm is the RCO Compact.
As soon as the pre-programmed application is selected via the display and a click of the knob, the Controller is completely set up.
All inputs and outputs are defined according to the selected function and the display shows only the specific menus to the application.
It makes an ideal replacement controller as you can also select to use the existing manufacturers sensors.
Small in size and low cost , the Controller can be networked without additional hardware and software costs or integrated into a full BMS.
Elesta will be exhibiting major new products at Light and Building in Frankfurt from 23-27 April 2006.
(Hall: 9.0 Walkway: B Stand: 65) Elesta will launch their new RCO-ER range of intelligent room controllers.
The low-cost room controllers with integrated remote control can be used in a stand-alone mode or as a network component of the Contolesta product family.
The stand-alone single room controllers can also be used as programmable slave modules via a master controller extending its flexibility of use.
In interaction with a master controller all variable parameters are adjustable such as the PID loop, heating and cooling function with dead zone as well as further parameters.
Time schedules for individual rooms are also programmable and parameters can be set.
The RCO-ER range of intelligent room controllers can be used for control of heating, cooling and ventilation in a wide scope of building automation application.
Control of heating and cooling valves are selectable by a Jumper between 2 point and 0-10V.
Two digital inputs can be used for windows and presence contact.
A unitary fan can be controlled with 0 - 10V signal or a separate relay.
Further models will be available with remote cable sensors for the option of sensing return air temperature in for example fan coil units.
Controllers have a two-piece housing for wall mounting, consisting of a ground plate with screw terminals and a front plate with snatch shutter.
The outer section with inserted electronics can be simply attached during commissioning.
With the introduction of the RCO-ER Elesta follows its concept of decentralised intelligence into single room control.
• Elesta UK: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
