Product category:
Valves and manifolds
News Release from: Emerson Process Management | Subject: Rosemount 752
Edited by the Processingtalk Editorial
Team on 28 January 2004
PlantWeb expands with a fieldbus display
The new Rosemount 752 Remote Indicator from Emerson Process Management provides an operator with a useful multi-function display on a Foundation Fieldbus segment, to give local plant indication
The new Rosemount 752 Remote Indicator from Emerson Process Management provides an operator with a useful multi-function display on a Foundation Fieldbus segment The Rosemount 752 is a local indicator capable of sequentially displaying up to eight function block values from any device on the H1 segment
This article was originally published on Processingtalk on 8 Sep 2008 at 8.00am (UK)
Related stories
Emerson launches two-wire Micro Motion Coriolis
Emerson Process Management has launched a two-wire Micro Motion Coriolis transmitter, expanding the value of Coriolis to the range of applications that require loop-powered flow devices.
Emerson adds DeviceNet and PROFIBUS DP protocols
Emerson Process Management has introduced communication options for the Micro Motion 2400S transmitter.
Each plant measurement or reading is shown for 3 seconds, along with a tag identifier and the engineering units.
The Remote Indicator demonstrates the continuing commitment by Emerson to the development of Foundation Fieldbus and PlantWeb architecture.
The Rosemount 752 makes it possible to display data from intelligent field devices on the plant close to the process, where it might be needed to improve operational efficiency.
Applications for the 752 Indicator include the display at grade level of data from any instrument mounted in an inaccessible location, for example tank level and contents data from instruments located on the top, or bottom of the tank.
Applications have also included the display of flow in elevated steam lines, and water flow in buried pipelines.
The Rosemount 752 is a perfect companion for the Rosemount 848T Multi-input temperature transmitter, allowing the display of 8 separate temperature readings.
The Remote Indicator can display all relevant information about a control loop close to the process, where it is required by the operator.
This is not restricted to measured values, the displays selected can show the desired set point being requested, the output of the PID controller driving the valve, or the actual valve position.
The Rosemount 752 can show any function block output from any device on the segment.
In addition the 752 can be equipped with a function block within the unit itself, providing advanced calculation and control capability to be used with devices on the segment.
Most plants using PlantWeb architecture require devices and displays installed in a hazardous area, and the Rosemount 752 has ATEX intrinsically safe approval and Fisco certification, which allows more devices per IS segment and therefore lower total installed cost. Request a free brochure from Emerson Process Management ...
• Emerson Process Management: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
