Product category:
Level and tank contents instrumentation
News Release from: Emerson Process Management | Subject: 3051S level measurement
Edited by the Processingtalk Editorial
Team on 19 November 2004
Esso refinery uses FF level and volume
transmitter
An Esso refinery in Norway has automated the level measurement on seven spherical propane and butane storage tanks using PlantWeb to deliver installation savings and integration within the network
Emerson Process Management has replaced independent level measurement equipment for seven spherical propane and butane storage tanks at the Esso refinery at Slagen in Norway, achieving installation savings and integration of the measurement solutions with the refinery network at no extra cost Emerson supplied PlantWeb digital plant architecture with Rosemount 3051S pressure transmitters communicating over Foundation fieldbus networks to a DeltaV digital automation system
This article was originally published on Processingtalk on 8 Sep 2008 at 8.00am (UK)
Related stories
Emerson launches two-wire Micro Motion Coriolis
Emerson Process Management has launched a two-wire Micro Motion Coriolis transmitter, expanding the value of Coriolis to the range of applications that require loop-powered flow devices.
Emerson adds DeviceNet and PROFIBUS DP protocols
Emerson Process Management has introduced communication options for the Micro Motion 2400S transmitter.
The existing independent level measurement solution, consisting of differential pressure manometers with oil filled capillaries, had been installed in the 1960s and required replacement.
Because of the site requirement that the independent level measurement system have a local indicator and be separate from the main level measurement system, Esso evaluated replacement using similar manometer technology, as well as alternatives.
A Foundation fieldbus-based solution was judged as an alternative that could bring cost and functional benefits, and also serve as an ideal test of this new technology.
Further reading
Emerson releases AMS Suite
Emerson Process Management has announced AMS Suite: Intelligent Device Manager 9.5 applications for planning and managing scalable wireless networks to support the process automation industry.
Emerson opens offshore engineering centre
Emerson Process Management has announced the opening of an engineering centre in Oslo, Norway.
Emerson improves oxygen analyser
Emerson Process Management has enhanced its Rosemount Analytical X-Stream oxygen analysers to improve efficiencies of large boilers and furnaces.
Evaluation led to selection of the Emerson PlantWeb solution that was no more costly than a manometer system because of the unique capabilities of the 3051S transmitters and Foundation fieldbus digital communications.
The DeltaV system with operator console was installed in a local substation.
Two transmitters were installed on each vessel, one measuring the top pressure and another bottom pressure.
AMS Suite: Intelligent Device Manager capability resides within the DeltaV system and is used to configure the transmitters, and to deliver predictive diagnostics from the devices for fast decision making.
Because only two fieldbus cabling segments were required for the seven sets of two transmitters, only two cables were required to be run to the storage vessels.
This contrasts with the usual fourteen cable runs, saving on installation costs.
The standard Foundation fieldbus function blocks in the 3051S transmitter are used to calculate the difference in pressures between the transmitters located at the top and bottom of the vessels.
This technology has removed the need for oil filled capillaries.
The DeltaV system uses the standard Foundation fieldbus function blocks to calculate the volume, and also uses the secondary value temperature reading from the 3051S pressure transmitter to perform a temperature compensation calculation that is applied to the level and volume measurements.
Both the volume and level values are sent to the local display on the lower transmitter by utilising the Foundation fieldbus digital communications.
The two measurements alternate on the display, providing the operators with a local indication.
This functionality is made possible by the combination of digital communications and the 3051S transmitter's capability to display any of the four values on the segment.
"In addition to the savings in cable and capillary costs, Esso has seen several other benefits," said Rolf Jenssen from the Norwegian office of Emerson.
"The local indication on the transmitters eliminates the need for an explosion-proof DeltaV display to be mounted outdoors; this would have been necessary because, for safety reasons, the operators are not allowed to enter the sub-station where the DeltaV system is installed.
The DeltaV system can now be connected to the site network, enabling information to be made available to other areas of the plant.
This was previously not possible with the manometer based level measurement".
Emerson provided an on-site training course for the operators and maintenance personnel to familiarize them with the new technology. Request a free brochure from Emerson Process Management ...
• Emerson Process Management: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
