Product category:
Temperature measurement: Conventional
News Release from: Endress + Hauser | Subject: iTemp TMT142
Edited by the Processingtalk Editorial
Team on 26 July 2005
The new iTemp temperature transmitter is
tough!
The new Endress+Hauser iTemp HART temperature field transmitter has been purpose-designed to perform where the job demands, and that frequently means in tough, inhospitable conditions!
The new Endress+Hauser iTemp TMT142 HART temperature field transmitter has been purpose-designed to perform where the job demands, and that frequently means in tough, inhospitable conditions! Industries such as chemical, petrochemical and mining pose their own set of challenges That's why the new iTemp TMT142 offers a robust housing with IP65 protection and full ATEX approval
This article was originally published on Processingtalk on 26 Jun 2008 at 8.00am (UK)
Related stories
Endress+Hauser at Energy 2008
Join us on stand 106 at the National Motorcycle Museum, Birmingham 10-11 September, to find out how to save between 5 and 20% of energy costs by monitoring and targeting your energy consumption
The TMT142 is also universally programmable with HART protocol for resistance thermometers, thermocouples and voltage transmitters.
The large rotatable rear-illuminated display shows the actual measured value, not only as a digital indicator but also as a 10% step trend bar graph for maximum operability.
What's more, the TMT142 fulfils NAMUR requirements: EMC to NE21, failure conditioning in the event of sensor breakdown to NE43 and corrosion detection to NE89.
Operation, visualisation and maintenance is carried out via a PC, using standard FieldCare or ReadWin 2000 operating software. Request a free brochure from Endress + Hauser ...
• Endress + Hauser: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
