New hygienic design Promass Coriolis flowmeter

For the stringent requirements of the pharmaceutical and life sciences sector, the new Promass P Coriolis mass flowmeter offers the optimum solution

Offering the enhanced performance of a bent-tube meter with the drainability of a straight-tube meter, the Promass P single-tube sensor fully complies with the numerous industry-specific requirements, codes and standards such as ASME BPE, ISPE, FDA, EHEDG and 3-A.

The hygienic design of Promass P allows it to drain completely so that no fluids get trapped inside, making it ideal for use in skid mount applications.

The fully welded hygienic design with no moving parts and no internal seals ensures maintenance-free operation, meaning no replacement of parts, no leakage due to seal deterioration and lower cost of ownership.

In addition, the product has an electropolished surface finish, guaranteeing Ra max at 0.38micron, not only for the process connection but through the entire measuring tube, for a clean, sterile and corrosion-resistant sensor.

Indeed, Promass P addresses over 40 specific requirements of ASME BPE, guaranteeing a hygienic design for the bioprocessing, life science and cosmetic industries.

And, with 3-A authorisation and EHEDG certification you can be assured the highest hygiene standards are met.

The single measuring tube technology has no flow splitter so is ideal for applications where minimal shear stress and careful handling of the product is necessary or in applications where low pressure loss is important.

Easy to install, Promass P requires no inlet and outlet runs or flow profilers/conditioners.

Promass P has been designed to withstand the frequent temperature stresses associated with cleaning and sterilisation - with no 'cool down' period required, it provides instant measurement after CIP/SIP.

Capable of withstanding temperatures up to +200C, Promass P is resilient to temperature shocks, maintaining accuracy to 0.1% of operating range even during cleaning periods.

Back to top