EMC cabinets protect electronics and networking

Enclosure Solutions has introduced the Verak EMC range of cabinets for electronic and networking applications, which provides more than 80 dB attenuation at 100MHz

Enclosure Solutions has introduced the Verak EMC range of cabinets for electronic and networking applications, which provides more than 80 dB attenuation at 100MHz.

Intended for use in electrically noisy environments such as switch rooms and the factory floor and available in heights of 27 to 42U, and 600 x 600, 600 x 800, 800 x 600 and 800 x 800 plan sizes, the Verak EMC is rated at 750kg static load capacity.

The 2mm steel framework is exceptional strong and rigid.

The EMC steel panels and doors are double skinned and the EMC glass door is a 4mm thick laminated construction with a fine metal mesh encapsulated between the two glass sheets.

Both steel and glass doors have a unique closing mechanism to ensure the integrity of the EMC seals; a swing handle controls a four-point over-centre cam closure that exerts the correct pressure on the gaskets, thereby avoiding over-compression and ensuring that screening performance does not degrade over time with repeated door openings.

Cables can be brought into the rack from the top, through the bottom and through 5U or 10U high cable entry panels above or below shortened front or rear doors.

Screened gland plates enable cables to enter without compromising the EMC performance.

Verak EMC can be fitted with plain or ventilated top covers and bases; the ventilated covers allow forced or natural convection cooling without reducing the rack EMC performance.

Thermal management products, specific to the Verak, ranging from heat exchangers and air-conditioners to intelligent climate control systems, are also available.

It accepts the market-leading Imrak complete range of internal fittings such as 19 inch panel mountings, cross members, cable troughs and trays and power distribution products.

Back to top