Product category:
Metal detection and X-ray systems
News Release from: E-Components and Chains | Subject: Test sticks for metal detectors
Edited by the Processingtalk Editorial
Team on 14 July 2005
Test pieces/sticks for metal detectors
E-Components and Chains are pleased to announce the launch of their "Detectamet" test stick for metal detectors, manufactured from plastic materials including clear plastic, nylon and polyethylene
E-Components and Chains are pleased to announce the launch of their "Detectamet" test stick for metal detectors Manufactured from a variety of plastic materials including clear plastic, nylon and polyethylene, Detectamet test pieces/sticks offer the following
This article was originally published on Processingtalk on 29 Jul 2004 at 8.00am (UK)
Related stories
Anti-slip stair tread plates resist corrosion too
New from E-Components and Chains comes a range of tread plates that fit over the top of existing stair treads, made from a high quality Isophthalic resin: corrosion and fire resistant, plus hard weari
Stainless steel clipboards
E-Components and Chains of Pocklington UK announce the launch of their range of stainless steel clipboards, developed with the food, pharmaceutical and catering industries in mind
* Calibrated and certified bearings to BS EN ISO 9002 and UKAS Calibration.
* Colour coding system for simple visual verification.
* Certification No Detailed on every piece.
Further reading
Conveyor Components range designs produced by CAD
The ECC range of Conveyor Components give the facility for simple CAD design: a conveyor becomes an assembly of basic parts with the drawing available on CAD
New range of plastic and steel conveyor chains
E-Components and Chains of Pocklington UK are pleased to announce the launch of their range of plastic and steel conveyor chains, offerring long lasting top performance
* On-line traceability and printable certification.
* Quality controlled ball bearings to ensure consistency.
* Repeatable high quality products.
* Cost effective solution.
With our experience of producing high quality components for metal detection in the food and pharmaceutical industries, we have found it increasingly beneficial to our clients, to make information easily available for quality assurance purposes.
By introducing an on-line system we've been able to reduce the amount of paperwork and time involved in tracing detailed information relating to this product significantly.
Each Detectamet test piece/stick has a number etched onto its side, which relates back to the Certificate of Conformity supplied by the bearing manufacturer.
The ease of access, coupled with a high quality manufacturing process, simple visible detection and colour coded verification, makes Detectamet test pieces/sticks a very cost effective way of managing the important aspects of safety through quality control.
Detectamet test pieces/sticks are available in the following styles.
* Standard = 100mm x 10mm x 10mm: Most widely used for metal detector testing.
* Pucks = 35mm diameter x 10mm deep, convenient cylindrical shaping.
* Flexible = 500mm lengths (special lengths also available).
* Manufactured from FDA nylon transparent tubing.
* Bearing is securely fixed in end of tubing.
* Very durable, very flexible - possible to bend through 90 degrees: Ideal for pipeline detectors.
* Rods = Available in 0.5m, 1m, 1.5m and 2m lengths: Useful for multi-head weigher applications where detector access is difficult.
* Durable polyethylene material, semi-flexible through 45 degrees.
* High-Visibility = 100mm x 10mm x 10mm.
* Translucent, high visibility material for easy visual detection.
* Available in a wide range of colours.
* Test Balls = 35mm diameter.
* Typically used in throat detectors.
* High Strength Grades and Sizes Available: 316 Stainless Steel Ferrous.
* Non-Ferrous Sizes = 0.3mm - 14mm as standard (others available upon request).
• E-Components and Chains: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
