Industrial fibre to Ethernet converters

Edited by the Processingtalk editorial team Nov 27, 2006

Ethernet Direct Corporation, a professional and primary provider of industrial networking and communication solutions, is offering the Retriever Series industrial fibre to Ethernet converter

Ethernet Direct Corporation, a professional and primary provider of industrial networking and communication solutions, is offering the Retriever Series industrial fibre to Ethernet converter.

The Retriever Series industrial fiber to Ethernet converter is comprised of 4 models.

* RUE-111 Industrial 10/100TX to FX Fiber Rail Converter, SC/2km with LLF.

* RUE-113 Industrial 10/100TX to FX Fiber Rail Converter, SC/30km with LLF.

* RUE-112 Industrial 10/100TX to FX Fiber Rail Converter, ST/2km with LLF.

* RUE-114 Industrial 10/100TX to FX Fiber Rail Converter, ST/30km with LLF.

The Retriever Series is a 10/100TX to 100FX industrial fibre converter.

The converter adapts automatically to the highest level of performance which is supported by the device connected to the RJ45 port.

With SC and ST models to choose from, RUE-110 Series Ethernet to fibre converter gives you more flexibility in adapting onsite applications.

RUE-110 Series also supports both half and full-duplex modes with auto-negotiation function.

The fibre port of RUE-110 Series uses a SC or ST connector.

Multimode models RUE-111 and RUE-112 can support distance up to 2 km and single-mode models RUE-113 and RUE-114 can support distance up to 30 km.

The built-in Link Loss Forwarding (LLF) technology and fault relay output can alarm users in real time if any port or power failure occurs.

To survive under harsh industrial environments, RUE-110 Series models all have IP31 standard aluminium case, and dual power inputs with reverse polarity protection.

Features.

* Supports half and full-duplex modes with auto-negotiation function.

* Has built-in Link Loss Forwarding technology.

* Offers dual power inputs for power redundancy.

* Robust IP31 aluminium case.

* DIN-Rail or wall mountable.

* Auto MDI/MDI-X for TX port.