Hassle-free Ethernet and serial media conversion

Ethernet Direct is offering a complete line of feature-rich converter series for industrial Ethernet or serial applications, for fibre conversions, and for RS232 to RS422/485 or USB connections

Ethernet Direct Corporation, a professional and primary provider of industrial networking and communication solutions, is offering a complete line of feature-rich converter series for industrial Ethernet or serial applications.

The wide selection of Ethernet Direct converters provide you with hassle free media conversion whether you need edge-of the network industrial devices, or cost effective serial converters to bridge RS-232 protocols, or a converter that connects to a PC USB port or USB Hub via the Universal Serial Bus.

Ethernet Direct offers:.

* RUE series Ethernet to fibre converters which come in ST and SC connector, in multimode, single mode duplex fibre and single fibre options.

* RUS series Serial to fibre converters.

* RUS series RS-232 to RS-422/485 converters and repeaters.

* RUS series RS-232 to USB converters.

Bridging the gap between legacy copper infrastructures and fibre growth, RUE-111, RUE-112, RUE-113 and RUE-114 industrial Ethernet to fibre converters provide an economical path towards extending the distance of an existing network, extending the life of non-fibre based equipment, or extending the distance between two like devices.

The advanced Link Loss Forwarding feature allows a more efficient troubleshooting and less on-site maintenance.

The RUS-9510 and RUS-9520 allow users to overcome the limitations of the RS232 protocol, including speed, range and networking capabilities, by using different voltage lines for data and control signals.

It is equipped with built-in 'AutoPro' function which enables the converter to automatically configure RS-422/485 baud rate without setting external DIP switches.

RUS-9530 convert is an intelligent, industrial type expansion module that connects to a PC USB port or USB Hub via the Universal Serial Bus (USB) port, providing one High-Speed RS-232/RS-422 or RS-485 jumperless serial port.

The RS-232 standard supports full-duplex communication and handshaking signals (such as RTS, CTS) and the RS-485 control is completely transparent to the user and software written for half-duplex COM works without any modification.

In addition to single port industrial USB to serial converter, some application would require multiple USB ports like 4 serial or 8 serial ports.

To meet this requirement, Ethernet Direct also offers RUS-414 and RUS-814 multi-port RS-232 to USB converter.

Back to top