Product category:
Power supplies and plant cabling
News Release from: Exide Technologies | Subject: SGV System
Edited by the Processingtalk Editorial
Team on 26 June 2007
High frequency power for self-guided
vehicle fleet
A major food manufacturer has invested in a fleet of 25 self-guided vehicles (SGVs) for one of its production facilities in the UK, powered by Chloride Motive Power
The SGV System was provided by FMC Technologies and replaces a 16 year old, obsolete wire guided AGV System The fleet will handle palletised finished case goods for despatch to the UK and Europe
This article was originally published on Processingtalk on 8 Jan 2008 at 8.00am (UK)
Related stories
Battery technology suitable even for Everest
The 'Extreme Everest' expedition has recently completed its groundbreaking expedition to the summit of Everest to research the effects of low oxygen on the body, using Dryfit Gel batteries
Minimising maintenance on Eurostar batteries
Working quietly (literally) behind the scenes at the new St Pancras terminal is a new fleet of Linde materials handling equipment powered by the Exide Technologies Sonnenschein Dryfit gel batteries
The SGVs are capable of transferring over 100 pallets per hour from the ends of production line palletisers to either shipping conveyors or ASRS storage conveyors.
The new vehicles offer a number of benefits over the out-going fleet but increased capacity has been made possible because of the new bank of High Frequency (HF) chargers from Chloride Motive Power (CMP).
Each vehicle is powered by a CMP 'Classic' lead acid battery.
Further reading
New weatherproof battery charger from CMP
Chloride Motive Power has introduced a new range of weatherproof battery chargers designed for use outside, where electric vehicle fleets predominantly work outdoors: airports, repair yards etc
New high frequency charger from CMP
Chloride Motive Power has updated its high frequency 2100HP charger to offer customers a number of operational improvements as well as a new look with a user-friendly interface
CMP Batteries are 'all aboard' conservation project Chloride Motive Power (CMP) has provided batteries for a project utilising an innovative method of teaching school children about conservation and water issues - a floating classroom.
The Electrical Control Systems Engineer at the food manufacturer commented: "We specified CMP batteries and chargers for a number of reasons: the High Frequency chargers were already in use at another of our production facilities and we had been impressed by their performance and reliability".
The SGV System and battery charging system work seamlessly together to ensure vehicles remain charged.
When a self-guided vehicle approaches a pre-programmed state of battery discharge, it automatically manoeuvres to one of eight charging points.
No human intervention is necessary as the SGV automatically positions itself on a charging plate on the floor, which is connected to a 48v, single-phase wall-mounted charger.
The previous AGVs relied on a 24v on-board charger, which would be connected to an overhead power supply and required an 8 hour charge.
Because of the 24/7 shift pattern operated at the factory, 6 AGVs would be recharging at any one time.
The new SGVs can be recharged within 5 hours and are also able to 'opportunity charge'.
Opportunity charging allows the vehicles to automatically dock at a charging station when they are not in use, and receive a fast charge, which enables them to remain in operation around the clock.
This means that there are usually only one or two SGVs on charge at any one time, freeing up more vehicles for material transport and allowing for maximized production.
Not only will battery life be extended for the new SGVs, but because they are laser guided, production is far more flexible.
A rotating laser scanner placed on top of the vehicle detects reflective targets mounted on plant walls, to navigate its way through the facility.
Vehicle guide paths can be changed, pick up and drop off points added, and system expanded quickly and easily.
This also means that should the layout of the factory be re-organised, the system can easily be reconfigured.
The Electrical Control Systems Engineer summed up: "We employ world-class production and maintenance practices and the AGV system offered real benefits.
The new SGV fleet will build on these operational advantages.
We managed to achieve a 5 or 6 year service life from our traction batteries and we are hoping to improve on this even further with the help of FMC Technologies and CMP; both companies have taken a 'team' attitude to this project - offering practical advice to our engineers and collaborating with each other.
• Exide Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
