Product category:
Gas and Steam Flow Measurement
News Release from: Fluid Components International | Subject: FlexMASSter ST98
Edited by the Processingtalk Editorial
Team on 22 July 2005
High purity application gas mass flow
measurement
The ST98 Flow Meter is for high purity process applications requiring precise gas flow measurement: it features a 316L stainless sensor element with an all-welded, electro-polished wetted surface
High purity process applications requiring precise gas flow measurement will benefit from the FlexMASSter ST98 Flow Meter Series from Fluid Components International, which features a 316L stainless steel thermal mass flow sensing element with an all-welded, wetted surface in a 10 or 15 Ra electro-polish finish Designed for demanding sanitary process applications in food, beverage, pharmaceutical, biotech, and chemical plants, the new ST98HP and ST98UP flow meters support a wide range of gas flow measurement applications
This article was originally published on Processingtalk on 3 Oct 2007 at 8.00am (UK)
Related stories
Highly intelligent Profibus DP/PA mass flow meter
The FlexMASSter ST98 Flow Meter Series now meets the Profibus-DP/PA standards and includes its own Device Type Manager (DTM) software for use in large scale process and plant automation systems
Two-wire level monitoring and interface control
The rugged NuTec LS2000 Level Switch provides highly reliable level monitoring and interface control in demanding process industries, giving low maintenance, long-life and low cost-of-ownership
They provide precise and repeatable gas flow measurement for high purity gas lines (eg, CO2 and others), pill coater air flow monitoring, CIP and SIP flow and temperature monitoring, condenser/evaporator flow control, scrubber gas discharge monitoring and more.
The ST98HP High Purity/Sanitary flow meter features a 15 Ra electro-polish finish with a 1-inch sanitary flange mated to a 316L inline flow tube.
The ST98UP Ultra High Purity flow meter comes with a 10Ra electro-polish finish with a 1 inch VCR connector mated to a 316L inline flow tube.
Further reading
Thermal mass flowmeter for hazardous areas
The new ST50 flowmeter delivers exceptional performance, installation versatility and economy in air, compressed air or nitrogen and a variety of other processes gases, as well as plant HVAC systems
Space-saving Hydrogen flowmeter is approved
The new space-saving ST75V Hydrogen flowmeter with agency approvals for hazardous areas is ideal for oil/gas refineries, ammonia production, food plants, mining, and fuel cell skids
The 316L flow tube is available with butt weld or sanitary flanged end process connections.
The ST98HP and ST98UP flow meter has an advanced thermal mass sensing element delivering precision flow and temperature measurement over a wide flow range.
It features an accuracy of +/-1% of reading plus +/-0.5% of full scale.
Highly consistent, the ST98 has a repeatability of +/-0.5% of reading.
Exceptionally versatile, the ST98 features a wide flow range from 2.0 to 3183 SCFM [3.4 to 5409 NCMH] in air at standard conditions for 70F [21.2C] and 14.7 psia, typical to most gases.
The ST98 offers low-flow sensitivity yet is able to operate from 10:1 to 100:1 turndown ratio.
The ST98 thermal mass sensing element is comprised of two all-welded 316L stainless steel thermowells that protect two matched platinum precision resistance temperature detectors (RTDs).
With a highly reliable no-moving parts design, one RTD is heated relative to the reference RTD, and the temperature difference between the two is related to the process gas mass flow rate.
The ST98 transmitter converts the differential temperature to a standard 4-20 mA output signal that has been linearised during the FCI factory NIST traceable calibration of the flow element.
The transmitter with its RS232 communications port is housed in a NEMA Type 4, Type 4X (IP66), or explosion-proof enclosure and can be integrally mounted to the flow element or remotely mounted up to 500 feet away.
In addition, HART and Profibus digital communications and an LCD display screen indicating flow rate, temperature and totalised flow are available as options.
Fluid Components International is a global company committed to meeting the needs of its customers through innovative solutions to the most challenging requirements for sensing, measuring and controlling the flow and level of air, gases and liquids.
• Fluid Components International: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
