Product category:
Legislation, REACH, WEEE and RoHS News
News Release from: Fibox | Subject: RoHS explanations
Edited by the Processingtalk Editorial
Team on 02 June 2006
Enclosure buyers can choose with
confidence!
Fibox offers an overview of the RoHS (Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment) Directive and its impact on the enclosure market
Steve Gallon of Fibox offers an overview of the RoHS (Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment) Directive and its impact on the Enclosure market Under the RoHS directive, as of 1 July 2006, the use of certain selected hazardous substances in electrical and electronic equipment, including lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE), will be restricted, with some limited exceptions
This article was originally published on Processingtalk on 22 Jul 2005 at 8.00am (UK)
Related stories
ABS enclosure helps flowmeter to success
Part of the success of the Pulsar Process Measurement Blackbox level and flow measurement solution can be attributed to its MNX ABS enclosure from industry specialists, Fibox
Introducing the 'Quicklock' system from Fibox
Fibox provides customers with fully integrated products and solutions for a whole host of enclosure applications: operating effectively in hostile and sometimes hazardous areas
The directive mandates EU member countries to take measures to enforce these requirements, under their respective jurisdictions.
The purpose of the RoHS restriction is in order to both protect human health and the environment by restricting the use of certain hazardous substances in new electrical and electronic equipment, whilst at the same time complementing the Waste Electrical and Electronic Equipment (WEEE) directive, which seeks to eliminate the usage of certain hazardous substances in products; specifically in electrical equipment, that will be treated and recycled at the end of their life.
As the deadline approaches, some manufacturers have already withdrawn certain noncompliant enclosure products from the market, but as a buyer of those products, how do you choose? JUST LOOK FOR THE LABEL.
Further reading
Fibox extends its Euronord range of enclosures
Fibox, who have been providing the most reliable range of thermoplastic enclosure products for almost 40 years, have announced a further extension to their range of Euronord products
Powelectrics choose Fibox for new telemetry unit
Powelectrics of Tamworth have chosen the Fibox MNX range of enclosures to house their new range of self powered IN4MA remote telemetry units
Fibox still on patrol along M6 toll road
The Fibox high impact resistant, polycarbonate enclosures supplied to house control gear for a total of 221 lighting units on the M6 relief Toll road have proved robust and maintenance free
As it stands, the RoHS Directive does not require that compliant products be labelled with any label.
Although some manufacturers are now using RoHS ready labels, the law does not require it and they are being used purely for marketing purposes.
This new directive relies solely on the 'producer responsibility' approach to achieve industry compliance.
But in order for manufacturers to achieve RoHS compliance, each material contained in each component part, must also be compliant; which in turn means that component suppliers will be required to certify and provide documented support that each component falls below the maximum concentration levels stated in the directive.
The substance limits currently defined are.
* Lead 0.1% by weight in homogenous materials.
* Mercury 0.1% by weight in homogenous materials.
* Cadmium 0.01% by weight in homogenous materials.
* Hexavalent Chromium 0.1% by weight in homogenous materials.
* Polybrominated Bipheryls (PBB) 0.1% by weight in homogenous materials.
* Polybromised Diphenyl Ethers (PBDE) 0.1% by weight in homogenous materials.
Homogenous materials, in RoHS terms, means a component or material that cannot be mechanically disjointed into different materials by unscrewing, cutting, crushing, grinding, by abrasive processes or similar procedures.
After July 1, 2006 all products on the market, not covered by exemptions will be assumed to meet the requirements of the RoHS Directive, if sold in Europe.
RoHS - HOW RoHS IMPACTS ON PRODUCT DESIGN.
This directive will have a significant impact on product design as it affects many of the current materials and components being used in existing enclosure products.
The designer may have to find cost effective and safe alternatives for the restricted substances.
Even though many of alternatives are available, they still have to be identified and evaluated before incorporating them into the production lines.
It is also essential that the functional performance of the product is not degraded or legal requirements and product safety issues not compromised.
The use of substitute materials may also have a significant impact on existing manufacturing processes.
Having chosen the alternatives, they then have to be sourced through suppliers that may be new and untried.
Managing and controlling the new supply chain is essential and is not easy.
Much of the risk of supplying non-conforming equipment is from outsourced components.
Manufacturers need to have a high level of confidence in the material contents but may have difficulty enforcing it down the whole supply chain.
Having got compliant materials and components, manufacturers will still need to manage and store a massive amount of extra information on material contents and their specific concentrations, gathered from supplier declarations or certification from recognised testing and chemical analysis specialists.
As I mentioned earlier, sometimes, the substituted substances may induce further problems during the manufacturing processes.
For example, the complete elimination of lead will require a complete change in current production technology.
Therefore, as a result of the new RoHS directive, there are many changes required on the design, production and the choice of 'lower risk' substitution materials needed for many products that fall within the auspices of the directive.
As well as the impact on certain manufacturers, who will need to rapidly withdraw a number of their incompliant PVC enclosure brands that are currently being used across a wide spectrum of industrial applications.
What should the Manufacturers Do to Fulfill RoHS Directive? Establish Compliance Status of Products.
1) Analyse Bill of Material (BOMs) to identify parts purchased and suppliers.
2) Review material and component content of products to identify potential presence of restricted substances.
3) Provide means for suppliers to complete the declarations of substance concentration level in agreed format.
4) Collect substance concentration data from supply chain.
5) Identify homogeneous materials in products.
6) Analyse supply chain data.
7) Identify non-compliances.
8) Define allowable thresholds for suppliers.
9) Obtain supplier material declarations.
Testing and Measurement for RoHS Compliance.
1) Decide the testing policy.
2) Prepare the testing plan.
3) Source and contract made with the testing facilities.
CAREFUL SELECTION.
Clearly the prime function of any enclosure is to protect the electrical or electronic components housed within it.
Engineers must first consider the environment in which the product is to be used in order make careful selections based on the manufacturer's data.
Other considerations such as ingress protection (IP ratings), impact resistance (IK rating), corrosion, thermal protection, UV stabilisation and materials must also be taken into the equation as they impact on the useful longevity of the product.
Once these points have been established, overall costs obviously play their part.
It's a fact that the ultimate reliability of the system you build and supply is often influenced by the initial choice and design of the enclosure, as it is by the components used to build the system itself.
SPECIAL ENCLOSURE REQUIREMENTS.
More and more these days, manufacturers are being asked to produce customised products to meet new end user requirements for instance the inclusion of windows, DIN rail mounted MCBs, switches, push buttons or calibration devises, membrane key-pads and displays requiring pre-drilled holes, cut-outs and sub-assembly mounting devices.
EMC shielding is also a necessity in certain environments as electromagnetic protection is needed to protect delicate components from interference from neighbouring devices.
Panel and System Builders are constantly building more and more complex systems in response to their customer's wishes, which in turn has inspired enclosure manufacturers to produce a wider choice of flexible and innovative enclosure solutions.
But remember, whatever your particular requirement, all bespoke enclosures started as a standard box.
• Fibox: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
