Product category:
Air handling: Dust + Fume extraction
News Release from: Flextraction | Subject: Fumex LFK175
Edited by the Processingtalk Editorial
Team on 22 February 2007
Fumex LFK175 single station dust/fume
filter kit
The Fumex LFK175 single station filter system complete with 75mm diameter local extractor arms and a S300-75 suction nozzle is designed to remove fumes, gases and atmospheric dust from the workplace
The Fumex LFK175 single station filter system complete with Terfu 75mm diameter local extractor arms and a S300-75 suction nozzle designed to remove fumes, gases and atmospheric dust from the workplace is available from Flextraction of Melton Mowbray Flextraction is a specialist solution provider, capturing at source all forms of airborne contamination - dust, fume and oil mist, and is the sole UK representative for Fumex AB, the Swedish extraction arms and filters manufacturer
This article was originally published on Processingtalk on 16 Jan 2007 at 8.00am (UK)
Related stories
Mobile weld fume extraction system
Flextraction, a specialist in capturing all forms of airborne contamination, have supplied their latest mobile weld fume extraction equipment - Strongmaster UPF, to the Severn Valley Railway
New mobile industrial fume extractor
The TEKA Caremaster SF is a new BIA European Standard approved mobile one way industrial fume extractor available from Flextraction, the specialist airborne contamination solution provider
The LF175 is one of a series of Local Filter Kits (LFK) designed for use in a wide variety of applications including soldering, gluing, bonding, dental laboratories, moulding, TIG welding, stained glass working, botany research and sculpturing.
It is based around the LF50PG-230 particle / gas fan and filter combination.
The fan has a high power 195W, 230V 50Hz motor and is compact with an integral speed control operating at a very low noise level around 60 dB(a).
The multi-stage filter utilises an H13 standard HEPA filter, separating parts to 99.99% for 0.3micron particles.
A 6.5kg activated carbon filter then filters gases, vapours and other odours.
The Terfu local extractor arms have friction joints with ball bearings to make positioning easy and accurate.
The arms stay in position when adjusted using adjustable plastic joints, 360deg swivel, brackets, support springs and they comes supplied with an air tight damper.
The arms are easy to clean with smooth aluminium tubes and easy to dismantle joints.
An ESD version with ESD approval to EN 100015-1, where any static electricity is diverted away to a special ground connection, is available for the electronics industry and laboratories using combustible gases.
• Flextraction: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
