Product category:
Air handling: Dust + Fume extraction
News Release from: Flextraction
Edited by the Processingtalk Editorial
Team on 20 March 2007
Flextraction at Total Processing and
Packaging
Flextraction will be exhibiting a range of new and existing dust collecting, mist separating and fume extraction equipment for the food, pharmaceutical and chemical industries at Total 2007
Flextraction, the Melton Mowbray based specialist solution provider capturing at source all forms of airborne contamination - dust, fume and oil mist, will be exhibiting a range of new and existing dust collecting, mist separating and fume extraction equipment for the food, pharmaceutical and chemical industries, at Total Processing and Packaging Exhibition from 15 - 18 May Flextraction are the sole UK representatives for
This article was originally published on Processingtalk on 16 Jan 2007 at 8.00am (UK)
Related stories
Mobile weld fume extraction system
Flextraction, a specialist in capturing all forms of airborne contamination, have supplied their latest mobile weld fume extraction equipment - Strongmaster UPF, to the Severn Valley Railway
New mobile industrial fume extractor
The TEKA Caremaster SF is a new BIA European Standard approved mobile one way industrial fume extractor available from Flextraction, the specialist airborne contamination solution provider
* Kiekens Products BV, Holland, industrial portable and fixed high vacuum cleaning systems.
* Fumex AB, Sweden, externally mounted extraction arms and specialist filter units.
* TEKA, Germany, localised extraction arms portable and fixed filter systems manufacturer.
Further reading
Fumex LFK175 single station dust/fume filter kit
The Fumex LFK175 single station filter system complete with 75mm diameter local extractor arms and a S300-75 suction nozzle is designed to remove fumes, gases and atmospheric dust from the workplace
Strong suction and dust cleaner at Total show
Modular low noise strong suction cleaners from Flextraction, for use collecting dust particles and granules, swarf, wet industrial waste and sludge will be on display at Total Processing and Packaging
Kiekens products on show include a new Dustmaster DM9000 for filtering very fine dusts found in pharmaceutical manufacture, food processing and chemical industries plus single phase KE1000 and 3-phase KE2000 industrial mobile vacuum cleaners with accessories including primary separators for picking up liquids and larger dust particles.
All these products meet directive 94/9 EC for equipment intended for potentially explosive atmospheres (ATEX).
A Tiltable Pre-separator for high vacuum dust extraction with a 2,000 kg load capacity, Multistage Centrifugal Turbo-compressors used in centralised vacuum systems for pick and place applications, vacuum suction and hold down in bakeries and other food manufacturing applications, plus a full range of industrial fans up to 300kW for dust and fume extraction and material conveyance as well as 'Mistmaster' mist separators for the extraction and separation of polluted mist and atomised vapours will be demonstrated.
The highlight of Fumex products on show will be the launch of brand new 100mm diameter polypropylene and ESD extraction arms, plus the LF175, one of a series of Local Filter Kits (LFK) for use in a wide variety of applications based around the LF50PG-230 particle/gas fan and filter combination and LF 70, a portable filter for the extraction of airborne pollutants in laboratories, pharmaceutical manufacturing as well as hospital applications.
Two new ATEX certified extraction arms will be shown, the R2000 125EX with a special paint finish and R2000 160EXH stainless steel arm plus a range of Terfu local extractor arms with friction joints and ball bearings to make positioning easy and accurate at the same time, the arms stay in position when adjusted as well as a new TEX-AA telescopic local extractor for use with a mass spectrometer in the pharmaceutical industry will be shown.
From TEKA, the Caremaster SF-BIA, a new mobile fume filter for nearly every industrial fume extraction application will be demonstrated.
Flextraction will be present on stand 4551 at the Total Processing and Packaging Exhibition at the NEC, Birmingham from 15 - 18 May 2007.
• Flextraction: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
