Product category:
Air handling: Dust + Fume extraction
News Release from: Flextraction | Subject: HNW1500
Edited by the Processingtalk Editorial
Team on 15 May 2008
New wet dust separator from Flextraction
The new HNW1500 high performance Wet Dust Separator has been launched by Flextraction, from Teka, the German manufacturer of localised extraction arms and portable and fixed filter systems
The Teka HNW1500 Wet Dust Separator is one of a series with airflows ranging from 1,500m3/hr to 10,000m3/hr The engine sizes range from 1,5kW 400V 50Hz up to 15,0kW 400V 50Hz
This article was originally published on Processingtalk on 16 Jan 2007 at 8.00am (UK)
Related stories
Mobile weld fume extraction system
Flextraction, a specialist in capturing all forms of airborne contamination, have supplied their latest mobile weld fume extraction equipment - Strongmaster UPF, to the Severn Valley Railway
With its high dust collection capacity it is designed for a wide range of industrial applications.
The air is cleaned by swirling the dust with water, with the air being centrifuged in the W-swirl, which was originally designed for the separation of explosive dusts and adopted for use with this Wet Dust Separator.
Dust particles in the air flow are enclosed in the water due to the strong turbulence in the swirl.
Water in this separator can be used again and again and pumps or nozzles are not used.
A robust high performance is utilised providing continuous operation of the separator.
Because of the arrangement of the impeller, the fan achieves a high negative pressure.
Flextraction, the Melton Mowbray based suppliers and manufacturers of Local Exhaust Ventilation (LEV) products for industrial dust and fume extraction, are the sole UK representatives for TEKA of Germany.
• Flextraction: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
