Product category:
Process Simulation
News Release from: Flomerics | Subject: EFD.Lab
Edited by the Processingtalk Editorial
Team on 05 October 2006
Flow simulation optimises hydrocarbon
trap design
Miniature Precision Components has optimised the design of a new hydrocarbon trap by simulating it with EFD.Lab, a design-oriented flow simulation software package
Miniature Precision Components has optimised the design of a new hydrocarbon trap by simulating it with EFD.Lab, a design-oriented flow simulation software package Mark Van de Bogert, Product Design Manager for Miniature Precision Components, evaluated the performance of 12 different design alternatives in order to minimise back-pressure across the trap while achieving the required level of hydrocarbon absorption
This article was originally published on Processingtalk on 3 Jul 2008 at 8.00am (UK)
Related stories
Optimising sail design using 3D simulation
Finnish sail maker WB-Sails is using EFD.Lab fluid dynamics simulation software from Flomerics to develop and optimise sails for Star and Finn class Olympic sailboats
Simulation reduces extractor hood design time
Marenco AG used the Flomerics EFD.Lab engineering fluid dynamics software to halve the design time for a new extractor hood, specified by one of their clients
"EFD.Lab makes it easy and inexpensive for design engineers to perform computational fluid dynamics simulations that in the past would have required the service of analysts with advanced degrees and software packages that lease for tens of thousands of dollars per year," Van de Bogert said.
Miniature Precision Components is a leader in the design and manufacture of injection moulded emission control components.
The company saw the need for a cost competitive hydrocarbon trap for a partial zero emission vehicle (PZEV) which is 90% cleaner than the average new car.
Further reading
Saipem UK selects EFD.Lab Fluid Dynamics Software
Saipem UK has selected the Flomerics EFD.Lab engineering fluid dynamics software for the analyses of transportation barges, construction and drilling vessels, and deck structures
Optimising gas burners on industrial air heaters
Eclipse Combustion used EFD.Lab, a general purpose engineering fluid dynamics software from Flomerics, to quickly design and optimise a large industrial air heater with burner in record time
A key feature of the PZEV vehicle is a hydrocarbon trap in the air intake that prevents stray hydrocarbons from migrating out of the engine after shutdown.
The hydrocarbon trap presents the inherent design challenge of requiring the ability to trap nearly all hydrocarbons while avoiding a significant increase in backpressure for air entering the engine because that would adversely affect fuel efficiency and performance.
"Modeling the design in EFD.Lab was easy," Van de Bogert said: "I simply called up the software inside CATIA.
EFD.Lab automatically distinguished between the solid and empty spaces in our CAD model and meshed the empty regions to prepare for flow analysis.
I added the boundary conditions within CATIA, a mass flow rate upstream and a pressure boundary condition downstream of the trap.
I analysed various rib configurations and found that a 5 spoke version backpressure was the lowest, but still not low enough".
Van de Bogert then ran through about a dozen iterations on the 5-spoke design, changing the geometry of the spokes and the spacing of the carbon elements.
The analysis results for each design showed flow rate and direction and pressure at each point in the trap.
"The ability to visualize the flow helped me understand where the restrictions were in each design and provided insight into how to reduce the backpressure," Van de Bogert said: "By the end of this process I had beaten the target for backpressure.
We built a rapid prototype of the optimised design and were delighted to discover that the backpressure of the rapid prototype was within a tenth of an inch of water of the CFD predictions". Request a free brochure from Flomerics ...
• Flomerics: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
